| 13229 |
Locknut |
| 13300 |
Jaws - Set of Three (Special Applications) |
| 15026 |
Fulcrum Pin Circlip |
| 16489 |
F Series 6.0 mm Nosepiece |
| 16715 |
F series 6.0 mm Jaw Pusher Assy |
| 2001-8549-002 |
O-Ring |
| A1-19756 |
Offset Head for 3/16" size Rivets |
| A1-19761 |
Offset Head for 3/32", 1/8" & 5/32" size Rivets |
| A1-19762 |
Offset Head for 3/32 & 1/8" Close End Rivets |
| A100-1 |
Support Body |
| A100-11 |
Fulcrum Pin Clip |
| A100-12 |
Torsion Spring |
| A100-13 |
Nosepiece Wrench |
| A100-14 |
Handle Latch |
| A100-15 |
Molded Grip - Lower |
| A100-16 |
Molded Grip - Upper |
| A100-2 |
Handle |
| A100-3 |
Jaw Guide |
| A100-4 |
Jaw |
| A100-5 |
Jaw Pusher |
| A100-6 |
Retaining Screw |
| A100-7 |
Body Bushing |
| A100-8 |
Jaw Pusher Spring |
| A100-9 |
Fulcrum Pin |
| A21 |
Screw to Secure A25 to A26 |
| A22 |
Collet Spring |
| A24 |
Long Link (Only Supplied with A52 & A73.as Assembly A68) |
| A25 |
Cover Strip |
| A26 |
Body Assembly |
| A27 |
Jaw Pin |
| A29 |
Connecting Pin to Secure A68 to A57 |
| A34 |
Collet Jaw 3/32" Open End & 1/8" Closed End |
| A35 |
Collet Jaw 1/8" & 5/32" Open End and Closed End |
| A36 |
Collet Jaw 3/16" Open End & Closed End |
| A450-1 |
Jaw Guide |
| A450-10 |
Power Coupler |
| A450-100 |
Nosepiece 3/16" O. E. Rivets ( Long Shank) |
| A450-101 |
Nosepiece for 1/4" "Monobolt" |
| A450-102 |
Nosepiece for 3/16" "Monobolt" |
| A450-103 |
Nosepiece for 3/16" UltraGrip Rivets |
| A450-104 |
Nosepiece for 1/4" UltraGrip Rivets |
| A450-105 |
Nosepiece for 3/16" "T-Rivets" |
| A450-11 |
Cross Head |
| A450-12 |
Handle |
| A450-13 |
Handle Grip |
| A450-14 |
Bolt |
| A450-15 |
Link |
| A450-16 |
Bolt |
| A450-17 |
Washer |
| A450-18 |
Nut |
| A450-19 |
Screw |
| A450-2 |
Jaws (Replaced by LLP-05) |
| A450-20 |
Damper |
| A450-21 |
Nosepiece for 1/4" "T-Rivets" |
| A450-22 |
Nosepiece for 1/8" Open End Rivets |
| A450-23 |
Nosepiece for 1/4" Open End Rivets |
| A450-3 |
Jaw Pusher |
| A450-4 |
Jaw Pusher Spring |
| A450-5 |
Nosepiece 3/16" O. E. Rivets - Short Shank |
| A450-6 |
Nosepiece for 5/32" Open End Rivets |
| A450-8 |
Nose Housing |
| A450-9 |
Body |
| A52 |
Power Coupling (Only Supplied with A24 & A73.as Assembly A68) |
| A54 |
Nosepiece for 1/8" Closed End |
| A55 |
Nosepiece for 5/32" Closed End |
| A56 |
Nosepiece for 3/16" Closed End |
| A57 |
Collet Case |
| A58 |
Adjusting Screw |
| A59 |
Heli Coil Insert |
| A60 |
Grooved Pin |
| A63 |
Nosepiece for 3/32" Open End |
| A64 |
Nosepiece for 1/8" Open End |
| A65 |
Nosepiece for 5/32" Open End |
| A66 |
Nosepiece for 3/16" Open End |
| A68 |
Power Coupling Assembly (Consisting of A24, A52, & A73) ‡ |
| A73 |
Link Pin (Only supplied with A24 & A52.as Assembly A68) |
| AN500-72 |
AN500-72 Coupler 20PM |
| AN500A-51-6 |
O-Ring AN500A-51-6 |
| AT203-191 |
Adapter Installation Wrench |
| AT203-361 |
Deep Socket 7/16 - Hydraulic Piston |
| C-RING RTW22 |
C-Ring RTW22 |
| DP203-011 |
Seal Sleeve |
| DP203-031 |
Handle |
| DP203-032 |
Trigger |
| DP203-037 |
End Cap - Pop Off Style |
| DP203-086 |
Hydraulic Piston |
| DP203-090 |
Nose Housing - FD |
| DP203-091 |
Nose Housing Nut |
| DP203-096 |
Nose Housing - RD |
| DP203-120 |
Clamp - Left |
| DP203-121 |
Clamp - Right |
| DP203-172 |
Jaw Guide - RD |
| DP203-181 |
Jaw Guide - FD |
| DP203-191 |
Adapter |
| DP203-210 |
Orifice - MCS |
| DP203-236 |
Bottom Housing - MCS |
| DP203-245 |
MCS Valve Stem |
| DP203-250 |
MCS Valve Stem Seal |
| DP203-260 |
Top Housing |
| DP203-261 |
Switch Ring, MCS |
| DP203-263 |
Collector Bottle, MCS |
| DP203-265 |
Leak Filter |
| DP203-272 |
MCS Filter |
| DP203-276 |
MCS Muffler |
| DP203-287 |
Valve Stem Retaining Bushing |
| DP220-002 |
Use DP220-639 or DP220-607 Assembly |
| DP220-003 |
Trigger Shaft |
| DP220-004 |
Trigger Cover |
| DP220-005 |
Trigger Shaft Sleeve |
| DP220-006 |
Use DP220-639 or DP220-607 Assembly |
| DP220-010 |
High Pressure Piston |
| DP220-011 |
Valve Block - 5 |
| DP220-012 |
Use DP220-640 Assembly |
| DP220-015 |
Jaw Pusher Spring |
| DP220-016 |
Trigger Spring |
| DP220-017 |
Trigger Pin |
| DP220-018 |
Tool Hanger - Horizontal |
| DP220-019 |
Grip Cover |
| DP220-020 |
Relief Valve Spring |
| DP220-021 |
Relief Valve |
| DP220-022 |
Pilot Piston Trigger |
| DP220-023 |
Slide Guide |
| DP220-024 |
Centering Finger |
| DP220-025 |
Centering Finger Shaft |
| DP220-027 |
Trigger |
| DP220-029 |
Centering Spring |
| DP220-030 |
Alarm Valve screw |
| DP220-031 |
Air Valve Supply Tube |
| DP220-032 |
Air Supply Tube |
| DP220-033 |
Air Chamber Supply Tube |
| DP220-034 |
Piston Retract Supply Tube |
| DP220-035 |
Return Supply Tube |
| DP220-036 |
Air Valve Shuttle Supply Tube |
| DP220-037 |
Mandrel Deflector |
| DP220-039 |
Cap - MCS |
| DP220-040 |
Latch box |
| DP220-041 |
Cap Shaft - MCS |
| DP220-042 |
Latch Shaft - MCS |
| DP220-043 |
Latch Spring Receiver - MCS |
| DP220-044 |
Latch - MCS |
| DP220-045 |
Magazine Clear Cover - 5 |
| DP220-046 |
Magazine Base - 5&6 |
| DP220-047 |
Cover Plate |
| DP220-048 |
Indexer Exhaust Bolt |
| DP220-049 |
Latch Spring - MCS |
| DP220-050 |
Magazine pin |
| DP220-051 |
Centering Base - 5 |
| DP220-052 |
Plate Spring - 5 |
| DP220-053 |
Plate Spring Support - 5 |
| DP220-054 |
Indexer Piston A - 5 |
| DP220-055 |
Indexer Piston B - 5 |
| DP220-056 |
Pawl - 5 |
| DP220-057 |
Indexer Cap - 5 |
| DP220-058 |
Indexer Spring - 5 |
| DP220-059 |
Indexer Buffer Spring - 5 |
| DP220-060 |
Use DP220-641 Assembly |
| DP220-061 |
Jaw Pusher - 5 size |
| DP220-062 |
Slide Pipe - 5 size |
| DP220-070 |
Pipe Spanner |
| DP220-071 |
T-Wrench |
| DP220-072 |
Single-ended Wrench (15mm) |
| DP220-073 |
Single-ended Wrench (14mm) |
| DP220-074 |
Screw Driver |
| DP220-075 |
Training Nose Adaptor |
| DP220-078 |
O-ring - S40 |
| DP220-079 |
O-ring JASO3067 |
| DP220-080 |
O-ring - S40 |
| DP220-081 |
O-ring P10 - Fill screw |
| DP220-082 |
O-ring P6 |
| DP220-083 |
O-ring S2 |
| DP220-085 |
O-ring P18 |
| DP220-086 |
Mini Y-packing, 8mm dia. |
| DP220-087 |
Mini Y-packing, 24mm dia. |
| DP220-088 |
Penta Seal, 15mm dia. |
| DP220-089 |
Penta Seal, 24mm dia. |
| DP220-090 |
Air Seal, 41.5mm dia. |
| DP220-092 |
DU Bushing |
| DP220-094 |
DU Bushing |
| DP220-095 |
O-ring |
| DP220-096 |
O-ring |
| DP220-097 |
E Ring - Magazine pin |
| DP220-098 |
E Ring - MCS Cap Shaft |
| DP220-099 |
C Ring - Trigger |
| DP220-101 |
Fill Plug |
| DP220-102 |
Socket Head Cap Screw - SUS |
| DP220-103 |
Hex bolt M5 x 16 SHSC, SS |
| DP220-104 |
Socket Head Cap Screw - SUS |
| DP220-105 |
Torx Head Cap Screw - SUS |
| DP220-106 |
Button Head Cap Screw - SUS |
| DP220-107 |
Cross-recessed PH Mach Screw |
| DP220-108 |
Cross-recessed PH Tap Screw |
| DP220-109 |
Cross-recessed PH Mach Screw |
| DP220-110 |
Cross-recessed PH Mach Screw |
| DP220-111 |
Hexagonal Bolt - SUS |
| DP220-112 |
Socket Head Cap Screw - SUS |
| DP220-113 |
Socket Set Screw |
| DP220-114 |
Socket Set Screw |
| DP220-115 |
Socket Head Cap Screw - Metric |
| DP220-117 |
O-RING - 29.7 X 2.4 X-SECT, JASO2030 |
| DP220-118 |
Push-to-connect, Male 6 mm |
| DP220-119 |
Push-to-connect, Male 4 mm |
| DP220-120 |
Elbow fitting, 6 mm |
| DP220-121 |
Barb elbow 360, 6 mm |
| DP220-122 |
Barb elbow 360, 4 mm |
| DP220-123 |
Push-to-connect Male 6 mm |
| DP220-124 |
Nose piston hydraulic seal |
| DP220-125 |
Wear ring |
| DP220-126 |
Jaw case piston hydraulic seal |
| DP220-129 |
Cross-recessed PH Mach Screw |
| DP220-130 |
O-ring |
| DP220-131 |
Bolt M3 x 6 BHCS, SS |
| DP220-132 |
Socket Head Cap Screw - SUS |
| DP220-134 |
Button Head Cap Screw - SUS |
| DP220-135 |
O-ring P20 |
| DP220-136 |
Indexer Exhaust Gasket |
| DP220-137 |
Socket Head Cap Screw - SUS |
| DP220-139 |
Socket Head Cap Screw - SUS |
| DP220-140 |
Valve Assembly |
| DP220-141 |
Socket Head Cap Screw - SUS |
| DP220-142 |
Socket Head Cap Screw - SUS |
| DP220-143 |
E Ring - Horizontal hanger |
| DP220-144 |
Magazine foot |
| DP220-145 |
Washer - M3 |
| DP220-146 |
Socket Head Cap Screw - SUS |
| DP220-151 |
Use DP220-643 Assembly |
| DP220-153 |
Hexagonal Wrench (5mm) |
| DP220-154 |
Hexagonal Wrench (2.5mm) |
| DP220-155 |
Fill Bottle |
| DP220-162 |
Magazine Latch |
| DP220-163 |
Magazine Latch Pin |
| DP220-164 |
Magazine Latch Spring |
| DP220-165 |
Maintenance tube |
| DP220-174 |
Torx Head Cap Screw - Metric |
| DP220-176 |
Barb elbow 360, 6 mm |
| DP220-177 |
Use DP220-644 Assembly |
| DP220-179 |
Use DP220-646 Assembly |
| DP220-182 |
Filter Holder (upgrade) |
| DP220-183 |
Filter Case (upgrade) |
| DP220-184 |
Cotton Ball (1 pc) |
| DP220-185 |
O-ring - Filter Holder (upgrade) |
| DP220-201 |
Plate Spring - 6 |
| DP220-202 |
Pawl - 6 |
| DP220-203 |
Use DP220-642 Assembly |
| DP220-204 |
Indexer Spring - 6 |
| DP220-205 |
Centering Base - 6 |
| DP220-206 |
Indexer Piston A - 6 |
| DP220-207 |
Indexer Piston B - 6 |
| DP220-208 |
Indexer Cover Plate - 6 |
| DP220-209 |
Indexer Buffer Spring - 6 |
| DP220-210 |
Plate Spring Support - 6 |
| DP220-211 |
Magazine Clear Cover - 6 |
| DP220-214 |
Valve Block - 6 |
| DP220-215 |
Jaw Pusher - 6 size |
| DP220-216 |
Slide Pipe - 6 size |
| DP220-220 |
O-ring P16 |
| DP220-402 |
Vacuum Tube Elbow Fitting |
| DP220-403 |
Vacuum Adjustment Fitting |
| DP220-404 |
Vacuum Tube - long |
| DP220-405 |
Vacuum Tube - short |
| DP220-406 |
Cable tie |
| DP220-407 |
Air Fitting - Male |
| DP220-408 |
Muffler (Obsolete: Use -182,-183, -184(x2), -185) |
| DP220-409 |
Inline Hook |
| DP220-410 |
E-Ring - Inline hook |
| DP220-414 |
Wear Ring Indexer Piston A - 5 |
| DP220-416 |
Wear Ring Indexer Piston A - 6 |
| DP220-421 |
Tube Bracket |
| DP220-500 |
Nosepiece 1/8" Close End |
| DP220-501 |
Nosepiece 1/8" Open End & 5/32" Close End |
| DP220-502 |
Nosepiece 5/32" Open End |
| DP220-503 |
Nosepiece 3/16" Open and Close End |
| DP220-504 |
Nosepiece 3/16" Open and Close End |
| DP220-525 |
Nosepiece 1/8" Close End Countersunk |
| DP220-527 |
Nosepiece 1/8" Open End & 5/32" Close End Countersunk |
| DP220-528 |
Nosepiece 5/32" Open End Countersunk |
| DP220-529 |
Nosepiece 3/16" Open & Close End Countersunk |
| DP220-607 |
Jaw case piston Assy. w/Seals.Includes: -002,-006,-084,-090,-117,-125,-126 |
| DP220-611 |
Nose piston Assy. w/Seals.Includes: -001,-088,-090,-093,-124,-125 |
| DP220-616 |
Magazine Assembly - 5.Incl.: -046,-050,-097 (x2),-144 (x2),-162,-163,-164,-045 |
| DP220-617 |
Magazine Assembly - 6.Incl.: -046,-050,-097 (x2),-144 (x2),-162,-163,-164,-211 |
| DP220-618 |
Jaw Set - 5 ( 3 piece set ) |
| DP220-619 |
Jaw Set - 6 ( 3 piece set ) |
| DP220-623 |
Jaw Setting Jig |
| DP220-636 |
Air Hose Assembly |
| DP220-638 |
Nose Piston Assembly.Includes: -001,-093 |
| DP220-639 |
Jaw Case Piston Assembly.Includes: -002,-006,-084 |
| DP220-640 |
Trigger Valve Block.Includes: -012,-127,-133 (x3) |
| DP220-641 |
Indexer Housing Assembly - 5.Includes: -092,-133 (x5),-138,-060 |
| DP220-642 |
Indexer Housing Assembly - 6.Includes: -092,-133 (x6),-138,-203 |
| DP220-643 |
Mandrel Collector Housing Assy.Includes: -151,-013,-014,-028,-116,-133 (x2) |
| DP220-644 |
POP Handle Assembly.Includes: -177,-091,-127,-128 |
| DP220-646 |
Intensifier Chamber Assembly.Includes: -179,-133 |
| DP220-804 |
Inline Oiler Kit (Filter, Regulator, Lub.) |
| DP220-806 |
Hydraulic oil, 1 QT container - AutoSet & Point&Set |
| DP220-810 |
Moly Grease, 2.5 oz jar |
| DP220-811 |
AutoSet® Seal kit |
| DP220-817 |
Slide Pipe ( 3 size rivets) |
| DP220-818 |
Jaw Pusher( 3 size rivets ) |
| DP220-907 |
Hydraulic Seal Jig |
| DP242-016 |
Demonstration/Storage Case |
| DP249-008 |
Jaw pusher for 1/4" Steel & SS HR rivets |
| DP900-005 |
O-Ring - Adapter |
| DP900-006 |
O-Ring - Collar FD |
| DP900-007 |
O-Ring - Collar RD |
| DP900-008 |
O-Ring - MH2BH |
| DP900-009 |
O-Ring - Switch Ring |
| DP900-010 |
O-Ring - Filter Cover |
| DP900-011 |
O-Ring - Collector Bottle |
| DP903-001 |
Screw - FHSCS 6-32 X 0.500 |
| DP904-001 |
Set Screw - 5/16-18 X 5/32 Hollow |
| DP906-002 |
Screw - 4-40 X 3/16 BHCS |
| DP907-001 |
Screw - 6-32 X 1 1/4 SHCS |
| DP908-001 |
Sealing Washer (Two pc. Assembly) |
| DP909-001 |
#3 Flat Washer - Orifice |
| DPN239-006 |
Jaw Guide |
| DPN239-007 |
Pulling Head |
| DPN239-008 |
Jaw Guide Lock |
| DPN239-009 |
Nose Housing |
| DPN239-011 |
Nose Housing Nut |
| DPN239-018 |
Spring Receiver |
| DPN239-019 |
Hydraulic Piston |
| DPN239-020 |
Housing Adapter |
| DPN239-022 |
Rod Seal Case |
| DPN239-029 |
Handle Upper |
| DPN239-034 |
End Cap Adapter |
| DPN239-036 |
Slider |
| DPN239-047 |
Fill Screw |
| DPN239-052 |
Upper Plate |
| DPN239-053 |
Sleeve Lower |
| DPN239-063 |
Sleeve Lock Nut |
| DPN239-064 |
Bottom Plate |
| DPN239-065 |
J Valve Cap |
| DPN239-068 |
J Valve Rod |
| DPN239-069 |
EXT Silencer |
| DPN239-071 |
Valve Stopper |
| DPN239-078 |
S Valve Rod |
| DPN239-083 |
Connect Tube |
| DPN239-086 |
Hexagon Nut |
| DPN239-089 |
Plug |
| DPN239-091 |
Chamber |
| DPN239-093 |
R Joint |
| DPN239-095 |
O S Sleeve |
| DPN239-097 |
O S Joint |
| DPN239-098 |
Collector Lock Collar |
| DPN239-108 |
Packing |
| DPN239-110 |
H.S M17 Screw Key for End Cap Adapter |
| DPN239-111 |
MCS Valve Rod |
| DPN239-112 |
MCS Cap |
| DPN239-116 |
Collar |
| DPN239-118 |
Ejector Guide |
| DPN239-119 |
End Cap Plate |
| DPN239-120 |
Fitting |
| DPN239-121 |
Air Tube |
| DPN239-126 |
R Joint Spacer |
| DPN239-127 |
R Joint Adapter |
| DPN239-130 |
Collector Body |
| DPN239-139 |
H.S M4 Screw Key |
| DPN239-144 |
Jaw Pusher |
| DPN239-147 |
Sleeve Upper |
| DPN239-150 |
Trigger |
| DPN239-151 |
Handle Assy |
| DPN239-152 |
Collector End Nut |
| DPN239-153 |
End Cap |
| DPN239-154 |
Collar Screw |
| DPN239-155 |
Collector Lock |
| DPN239-156 |
Collector End |
| DPN239-158 |
Air Line - 6' Length |
| DPN239-159 |
Air Line Fitting |
| DPN239-160 |
Hose Female Fitting |
| DPN239-163 |
Deflector Adapter |
| DPN239-167 |
Collector End Cap |
| DPN239-168 |
Collector Silencer |
| DPN239-169 |
Nose Housing - 5" length |
| DPN239-170 |
Pulling Head Extension |
| DPN239-171 |
Pulling Head Joint |
| DPN275-001 |
Jaw Guide |
| DPN275-002 |
Pulling Head |
| DPN275-003 |
Jaw Guide Lock |
| DPN275-004 |
Nose Housing |
| DPN275-005 |
Nose Housing Nut |
| DPN275-006 |
Spring Reciever |
| DPN275-007 |
Hydraulic Piston |
| DPN275-008 |
Housing Adapter |
| DPN275-009 |
Rod Seal Case |
| DPN275-010 |
Handle Upper |
| DPN275-014 |
Sleeve Upper |
| DPN275-021 |
Chamber |
| DPN275-023 |
EXT Valve Rod |
| DPN275-024 |
EXT Valve Case |
| DPN275-025 |
EXT Valve Head |
| DPN275-026 |
Washer |
| DPN275-027 |
Jaw Pusher |
| DPN275-031 |
MCS Cap |
| DPN275-032 |
End Cap Adapter |
| DPN275-033 |
Slider |
| DPN275-034 |
Ejector Guide |
| DPN275-036 |
Collector Body |
| DPN275-037 |
Slider Pusher |
| DPN275-127 |
Nose Housing - 5.5" (140mm) length |
| DPN275-128 |
Pulling Head Extension |
| DPN275-129 |
Pulling Head Joint |
| DPN275-199 |
Reduced Nose Housing - 5.5" (140mm) length |
| DPN275-200 |
Pulling Head Joint |
| DPN275-204 |
Corner Head Adapter |
| DPN275-205 |
Draw Bolt |
| DPN275-206 |
Corner Head Adapter |
| DPN275-207 |
Draw Bolt |
| DPN276-001 |
Jaw Guide |
| DPN276-002 |
Pulling Head |
| DPN276-003 |
Jaw Guide Lock |
| DPN276-004 |
Nose Housing |
| DPN276-005 |
Nose Housing Nut |
| DPN276-006 |
Jaw Pusher |
| DPN276-007 |
Pulling Head Joint |
| DPN276-008 |
Hydraulic Piston |
| DPN276-009 |
Spacer Pipe |
| DPN276-010 |
Housing Adapter |
| DPN276-011 |
Rod Seal Case |
| DPN276-012 |
Handle Upper |
| DPN276-013 |
MCS Valve Case |
| DPN276-014 |
MCS Valve Rod |
| DPN276-015 |
End Cap Adapter |
| DPN276-016 |
MCS Cap Front |
| DPN276-017 |
Slider |
| DPN276-018 |
Slider Pusher |
| DPN276-019 |
MCS Cap Tail |
| DPN276-020 |
End Cap |
| DPN276-021 |
Collar Screw |
| DPN276-023 |
Ejector Guide |
| DPN276-024 |
End Cap Plate |
| DPN276-028 |
Sleeve Upper |
| DPN276-029 |
Restrictor |
| DPN276-030 |
Upper Plate |
| DPN276-031 |
Sleeve Lower |
| DPN276-039 |
Tube Seal Case |
| DPN276-043 |
Sleeve Lock Nut |
| DPN276-044 |
Bottom Plate |
| DPN276-045 |
J Valve Cap |
| DPN276-046 |
J Valve Rod |
| DPN276-047 |
J Valve Fitting |
| DPN276-048 |
H.L Fitting |
| DPN276-049 |
Air Tube |
| DPN276-050 |
Handle R,L |
| DPN276-051 |
Plug |
| DPN276-052 |
Chamber |
| DPN276-053 |
R Joint Spacer |
| DPN276-054 |
R Joint Adapter |
| DPN276-056 |
Collector Lock Collar |
| DPN276-057 |
Collector Lock |
| DPN276-058 |
Collector Body |
| DPN276-059 |
Collector Silencer |
| DPN276-060 |
Collector End Cap |
| DPN276-061 |
Collar |
| DPN276-062 |
Collector End |
| DPN276-063 |
Hook |
| DPN276-067 |
Nose Housing - 7.9" (200mm) length |
| DPN276-068 |
Pulling Head Extension |
| DPN276-069 |
Pulling Head Joint |
| DPN276-076 |
R Joint |
| DPN276-077 |
OS Joint |
| DPN276-078 |
OS Slider |
| DPN276-080 |
Deflector Adapter |
| DPN276-081 |
Corner Head Adapter |
| DPN276-082 |
Draw Bolt |
| DPN276-083 |
Corner Head Adapter |
| DPN276-084 |
Draw Bolt |
| DPN276-085 |
Pan Head Screw |
| DPN276-155 |
Air Line Fitting |
| DPN276-156 |
Hose Female Fitting |
| DPN276-157 |
Air Tube |
| DPN276-158 |
Ear Clamp |
| DPN900-001 |
O-Ring |
| DPN900-002 |
O-Ring |
| DPN900-003 |
O-Ring |
| DPN900-004 |
O-Ring |
| DPN900-005 |
O-Ring |
| DPN900-006 |
O-Ring |
| DPN900-007 |
O-Ring |
| DPN900-008 |
O-Ring |
| DPN900-009 |
O-Ring |
| DPN900-010 |
O-Ring |
| DPN900-011 |
O-Ring |
| DPN900-012 |
O-Ring |
| DPN900-013 |
O-Ring |
| DPN900-014 |
O-Ring |
| DPN900-015 |
O-Ring |
| DPN900-016 |
O-Ring |
| DPN900-017 |
O-Ring |
| DPN900-018 |
O-Ring |
| DPN900-019 |
O-Ring |
| DPN900-020 |
O-Ring |
| DPN900-021 |
O-Ring |
| DPN900-022 |
O-Ring |
| DPN900-024 |
O-Ring |
| DPN900-025 |
O-Ring |
| DPN900-026 |
O-Ring |
| DPN900-027 |
O-Ring |
| DPN900-028 |
O-Ring |
| DPN900-029 |
O-Ring |
| DPN900-030 |
O-Ring |
| DPN900-035 |
O-Ring |
| DPN900-036 |
O-Ring |
| DPN900-045 |
O-Ring |
| DPN900-059 |
O-Ring |
| DPN900-060 |
O-Ring |
| DPN900-061 |
O-Ring |
| DPN900-062 |
O-Ring |
| DPN900-063 |
O-Ring |
| DPN900-064 |
O-Ring |
| DPN900-065 |
O-Ring |
| DPN900-066 |
O-Ring |
| DPN900-067 |
O-Ring |
| DPN900-068 |
O-Ring |
| DPN900-069 |
O-Ring |
| DPN900-070 |
O-Ring |
| DPN900-071 |
O-Ring |
| DPN900-072 |
O-Ring |
| DPN900-073 |
O-Ring |
| DPN900-074 |
O-Ring |
| DPN900-075 |
O-Ring |
| DPN900-076 |
O-Ring |
| DPN900-077 |
O-Ring |
| DPN900-078 |
O-Ring |
| DPN900-079 |
O-Ring |
| DPN900-080 |
O-Ring |
| DPN901-001 |
Jaw Pusher Spring |
| DPN901-002 |
Spring |
| DPN901-003 |
Return Spring |
| DPN901-005 |
Jaw Pusher Spring |
| DPN901-006 |
Spring |
| DPN901-007 |
Return Spring |
| DPN901-008 |
EXT Valve Spring |
| DPN901-019 |
Jaw Pusher Spring |
| DPN901-020 |
Spring |
| DPN901-021 |
Return Spring |
| DPN901-022 |
Spring |
| DPN901-144 |
N/A |
| DPN902-001 |
Retaining Ring |
| DPN902-002 |
Retaining Ring |
| DPN903-001 |
Flat Head Cap Screw |
| DPN905-008 |
Socket Set Screw |
| DPN906-001 |
Button Head Cap Screw |
| DPN907-001 |
Socket Head Cap Screw |
| DPN907-002 |
Socket Head Cap Screw |
| DPN907-003 |
Socket Head Cap Screw |
| DPN907-004 |
Socket Head Cap Screw |
| DPN907-009 |
Socket Head Cap Screw |
| DPN908-001 |
Scraper |
| DPN908-002 |
B.U-Ring |
| DPN908-003 |
Penta Seal |
| DPN908-004 |
B.U-Ring |
| DPN908-005 |
Penta Seal |
| DPN908-006 |
B.U-Ring |
| DPN908-007 |
|
| DPN908-008 |
|
| DPN908-015 |
Scraper |
| DPN908-021 |
B.U-Ring |
| DPN908-022 |
Penta Seal |
| DPN908-023 |
B.U-Ring |
| DRN275-006 |
|
| E-RING-10 |
E-Ring-10 |
| FA203-092 |
Nose Housing Assembly - FD |
| FA203-097 |
Nose Housing Assembly - RD |
| FA203-194 |
Pulling Head Adapter Assembly - FD |
| FA203-200 |
Pulling Head Adapter Assembly - RD |
| FA203-2102K |
Small Diameter Front End Extension Kit for.ProSet® 2100 Rivetool - 6 Inch Length |
| FA203-2103K |
Small Diameter Front End Extension Kit for.ProSet® Rivetool - 8 Inch Length |
| FA203-2104K |
Standard Diameter Front End Extension Kit for.ProSet® Rivetool - 6 Inch Length |
| FA203-2105K |
Standard Diameter Front End Extension Kit for.ProSet® Rivetool - 8 Inch Length |
| FA203-277 |
Middle Housing Assembly |
| FA203-279 |
MCS Bottom Housing Assembly |
| FA203-281 |
Filter Cover Assembly (Includes: DP900-010 (x2)) |
| FA203-400 |
Seal Kit (ProSet® 2100) |
| FA203-401 |
Seal Kit (ProSet® 2100MCS) |
| FA203-402 |
Mandrel Collector for ProSet® 2100 Rivetool |
| FA203-403 |
Small Diameter Front End Kit for ProSet® 2100.Rivetool - 4 inch Length |
| FA203-404 |
Nose Housing Nut Kit |
| FA203-405 |
MCS Collector Bottle Assembly |
| FA203-406 |
ProSet® 2100 End Cap Assembly |
| FA203-408 |
Adaptor Kit for ProSet® 1600 & 2100 Tools |
| FA203-414 |
MCS5000 Adaptor Kit for 8 size rivets.. |
| FAN239-043 |
Ejector Assembly |
| FAN239-059 |
Air Piston Assembly |
| FAN239-074 |
S.V Case Assembly |
| FAN239-148 |
Handle Lower Assembly |
| FAN239-157 |
Air Line Assembly |
| FAN239-166 |
Collector Assembly |
| FAN239-172 |
Jaw Pusher Assembly extension Kit - 3/32" |
| FAN239-174 |
Front End Extension kit for ProSet® 1600 - 5" length |
| FAN239-175 |
Seal Kit (ProSet® 1600/1600MCS) |
| FAN239-176 |
Jaw Pusher Assembly |
| FAN239-177 |
Mandrel Collector for ProSet® 1600 Rivetool |
| FAN275-011 |
Ejector Assembly |
| FAN275-015 |
Handle Lower Assembly |
| FAN275-018 |
Air Piston Assembly |
| FAN275-022 |
EXT Valve Assembly |
| FAN275-028 |
Jaw Pusher Assembly |
| FAN275-035 |
Collector Assembly |
| FAN275-130 |
Jaw Pusher Assembly Extension Kit |
| FAN275-132 |
Front end extension kit - 5.5" (140mm) length |
| FAN275-133 |
Seal Kit |
| FAN275-134 |
MCS Retrofit Kit.. |
| FAN275-198 |
Reduced Front End Extension Kit - 5.5" (140mm) length.. |
| FAN275-202 |
Pulling Head Extension - Reduced |
| FAN276-022 |
Ejector (Assembly) |
| FAN276-033 |
Handle Lower Assembly |
| FAN276-036 |
Air Piston Assembly |
| FAN276-040 |
Tube Assembly |
| FAN276-055 |
|
| FAN276-064 |
|
| FAN276-072 |
Jaw Pusher Assembly Extension Kit |
| FAN276-075 |
Front end extension kit - 7.9" (200mm) length |
| FAN276-152 |
|
| FAN276-154 |
Air Line Assembly |
| FAN276-165 |
|
| LLP-01 |
Body |
| LLP-02 |
Nose Housing |
| LLP-03 |
Jaw Case |
| LLP-04 |
Jaw Pusher |
| LLP-05 |
Jaws |
| LLP-06 |
Jaw Pusher Spring |
| LLP-07 |
Jaw Case Carrier (short) |
| LLP-08 |
Power Coupling |
| LLP-09 |
Sleeve |
| LLP-10 |
Crosshead |
| LLP-11 |
Handle A (2 hole) |
| LLP-12 |
Handle B (1 hole) |
| LLP-13 |
Hex Bolt M5 x 40.5 |
| LLP-14 |
Hex Bolt M5 x 30 |
| LLP-15 |
Link |
| LLP-16 |
1/8" or 3.2mm Nosepiece |
| LLP-17 |
5/32" or 4.0mm Nosepiece |
| LLP-18 |
3/16" or 4.8mm Nosepiece |
| LLP-19 |
Jaw Case Carrier (long) |
| LLP-20 |
Mandrel Guide Tube |
| LLP-21 |
Wrench |
| LLP-22 |
M5 Lock Nut |
| LLP-23 |
Washer |
| LLP-24 |
Copper Washer |
| LLP-25 |
Screw |
| LLP-50 |
Cushion |
| LLP-51 |
Handle Grip |
| MCS100-28 |
Vacuum Sleeve Insert (MCS5000) |
| MCS100-35 |
Transducer Tube |
| MCS100-36 |
Gasket |
| MCS4000-1 |
MCS Cap Assembly |
| MCS4000A-06 |
Collector Lock Nut |
| MCS4000A-07 |
Collector |
| MCS4000A-07-1 |
Collector Body |
| MCS4000A-07-2 |
Collector Cover |
| MCS4000A-07-3-1 |
Collector End |
| MCS4000A-09 |
MCS Nozzle |
| MCS500-1 |
Vacuum Cap Cover |
| MCS500-10 |
O-Ring / Cap Body - Valve Body |
| MCS500-101 |
Vacuum Cap Assy. |
| MCS500-12 |
Vacuum Cap Cover Screw |
| MCS500-13 |
Vacuum Cap Cover Nut |
| MCS500-2 |
Filter Cover |
| MCS500-21 |
Hose Fitting |
| MCS500-22 |
Vacuum Pump "O" Ring |
| MCS500-30 |
Vacuum Cap Body Assembly |
| MCS500-31 |
Hose Connection Assy. |
| MCS500-33 |
Shut-Off Valve |
| MCS500-34 |
O-Ring |
| MCS500-5 |
Filter |
| MCS500-6 |
Muffler |
| MCS5000 |
Remote Mandrel Collector System |
| MCS5000-13 |
Mandrel Collection Hose - 1/8" rivets - 15 ft. |
| MCS5000-13FT |
Mandrel Collection Hose - 1/8" rivets |
| MCS5000-14 |
Mandrel Hose - 5/32" & 3/16" rivets - 15 ft. |
| MCS5000-14FT |
Mandrel Hose - 5/32" & 3/16" rivets |
| MCS5000-17 |
Nut 5/8 - 18 |
| MCS5000-18 |
Rivet Shield |
| MCS5000-19 |
Vacuum Transducer Housing (MCS5000) |
| MCS5000-22 |
Deflector Plate |
| MCS5000-23 |
Hose Fitting - 1/4" rivets |
| MCS5000-24 |
Mandrel Collection Hose - 1/4" rivets - 15ft. |
| MCS5000-24FT |
Mandrel Collection Hose - 1/4" rivets |
| MCS5000-26 |
Top Plate |
| MCS5000-27 |
Retaining Ring |
| MCS5000-28 |
Screw |
| MCS5000-29 |
Maximum Fill Label |
| MCS5000-30 |
Warning Label |
| MCS5000-31 |
Gasket |
| MCS5000-32 |
Fitting (for 1/4 " Tools Setting 1/8" Rivets) |
| MCS5000-5 |
Cap & Gasket Assembly (MCS5000) |
| MCS5000-510 |
Adaptor Kit for PRG510A 1/8" & 3/16" Rivets |
| MCS5000-5200 |
Adaptor Kit for PRT5200 1/8" & 3/16" Rivets |
| MCS5000-5250 |
Adaptor Kit-PRT5250 1/8" & 3/16" Rivets (Old style) |
| MCS5000-5250A |
Adaptor Kit for PRT5250A 1/8" & 3/16" Rivets |
| MCS5000-540 |
Adaptor Kit for PRG540 1/8" & 3/16" Rivets |
| MCS5000-5400 |
Adaptor Kit for PRT5400 1/8" & 3/16" Rivets |
| MCS5000-55 |
MCS Adaptor Assembly (PRT5600) |
| MCS5000-5600 |
Adaptor Kit for PRT5600 1/8" & 3/16" Rivets |
| MCS5000-6 |
Additional Kit Required for 1/4" Rivets |
| MCS5000-67 |
Vacuum Sleeve Insert (MCS5000LC) |
| MCS5000-69 |
Vacuum Transducer Housing (MCS5000LC) |
| MCS5000-7 |
Collector Unit Assembly |
| MCS5000-75 |
Handle Cap Adaptor (PRT5200) |
| MCS5000-76 |
Adaptor Cap (PRT5200) |
| MCS5000-77 |
Handle Cap Adaptor (PRT5400) |
| MCS5000-78 |
Adaptor Cap (ProSet 2100, PRT5400) |
| MCS5000-8 |
Muffler Assembly and Bucket |
| MCS5000-81 |
Strain Relief (ProSet 2100, PRT5200. PRT5250A, PRT5400) |
| MCS5000-82 |
Handle Cap Adaptor Assembly (PRT5200) |
| MCS5000-84 |
Handle Cap Adaptor Assembly (PRT5400) |
| MCS5000LC |
Remote Mandrel Collector System - Low Consumption |
| MCS5000LC-5 |
Cap and Gasket Assembly (MCS5000LC) |
| MCS510-100 |
Mandrel Collector for PRG510A Rivetool |
| MCS510-101 |
Collector (MCS510 & MCS510A) |
| MCS510-11 |
Mandrel Guide Nut |
| MCS510-12 |
Mandrel Guide |
| MCS510-400 |
Seal Kit (MCS510 & MCS510A) |
| MCS510A |
PRG510A Riveting Tool with Mandrel Collector,.standard Nosepieces and standard Air Hoses |
| MCS510RR |
|
| MCS511A |
PRG511A Riveting Tool with Mandrel Collector, standard Nosepieces and standard Air Hoses |
| MCS5200-10 |
Valve Stem |
| MCS5200-100 |
Mandrel Collector for PRT5200 Rivetool |
| MCS5200-11 |
Screw |
| MCS5200-12 |
Switch |
| MCS5200-13 |
O-Ring |
| MCS5200-14 |
Valve Housing |
| MCS5200-16 |
Collector Gasket |
| MCS5200-17 |
O-Ring |
| MCS5200-18 |
O-Ring |
| MCS5200-19 |
Retainer - Transducer |
| MCS5200-2 |
Filter Cover |
| MCS5200-20 |
Vacuum Pump (Includes: MCS500-22 (x2)) |
| MCS5200-21 |
O-Ring |
| MCS5200-24 |
Valve Housing Assembly |
| MCS5200-25 |
Vacuum Cap Body Assembly |
| MCS5200-3 |
Spring - Valve Stem |
| MCS5200-4 |
Valve Body |
| MCS5200-400 |
Seal Kit (MCS5200) |
| MCS5200-5 |
Filter |
| MCS5200-6 |
Muffler |
| MCS5200-7 |
Valve Guide |
| MCS5200-8 |
Collector (Without Gasket MCS5200-16) |
| MCS5200-9 |
Vacuum Cap Body |
| MCS5200RR |
|
| MCS5250A |
PRT5250A w/MCS5000 Remote Mandrel Collection System & MCS5000-5250 Adaptor Kit |
| MCS5251A |
PRT5251A w/MCS5000 Remote Mandrel Collection System & MCS5000-5250 Adaptor Kit |
| MCS5252A |
PRT5252A w/MCS5000 Remote Mandrel Collection System & MCS5000-5250A Adaptor Kit |
| MCS5253A |
PRT5253A w/MCS5000 Remote Mandrel Collection System & MCS5000-5250A Adaptor Kit |
| MCS5254A |
PRT5254A w/MCS5000 Remote Mandrel Collection System & MCS5000-5250A Adaptor Kit |
| MCS5255A |
PRT5255A w/MCS5000 Remote Mandrel Collection System & MCS5000-5250A Adaptor Kit |
| MCS5300-1 |
Automatic Shut-Off Valve |
| MCS5300RR |
|
| MCS540 |
PRG540 w/MCS540-100 Mandrel Collection System Installed on Tool |
| MCS540-100 |
Mandrel Collector for PRG540 Rivetool |
| MCS540-101 |
Collector with "O" Ring (MCS540) |
| MCS540-102 |
Hydraulic Piston Rod Assembly (MCS540) |
| MCS540-12 |
Hydraulic Piston (MCS540) |
| MCS540-13 |
Hydraulic Piston Assembly (Vacuum) (PRG540) |
| MCS540-14 |
Hydraulic Piston Rod (MCS540) |
| MCS540-15 |
Piston Seal (MCS540) |
| MCS540-400 |
Seal Kit (MCS540) |
| MCS540-8 |
Collector (MCS540) |
| MCS5400 |
PRT5400 w/MCS5400-100 Mandrel Collection System Installed on Tool |
| MCS5400-10 |
Valve Stem |
| MCS5400-100 |
Mandrel Collector for PRT5400Rivetool |
| MCS5400-11 |
Vacuum Cap Screw |
| MCS5400-12 |
Switch / Deflector Ring |
| MCS5400-13 |
Valve Body Ring |
| MCS5400-14 |
Valve Housing |
| MCS5400-16 |
Air Block |
| MCS5400-2 |
Filter Cover |
| MCS5400-20 |
Vacuum Pump Assembly |
| MCS5400-30 |
Valve Housing Assembly |
| MCS5400-4 |
Valve Body |
| MCS5400-40 |
Vacuum Cap Body Assembly |
| MCS5400-400 |
Seal Kit (MCS5400) |
| MCS5400-5 |
Filter |
| MCS5400-6 |
Muffler |
| MCS5400-8 |
Collector Bottle |
| MCS5400-9 |
Vacuum Cap Body |
| MCS5400LS |
PRT5400LS w/MCS5400-100 Mandrel Collection System Installed on Tool |
| MCS5400RR |
|
| MCS5404 |
PRT5404 w/MCS5400-100 Mandrel Collection System Installed on Tool |
| MCS5404LS |
PRT5404LS w/MCS5400-100 Mandrel Collection System Installed on Tool |
| MCS540RR |
|
| MCS541 |
PRG541 w/MCS540-100 Mandrel Collection System Installed on Tool |
| MCS5500-11 |
Vacuum Body Screw |
| MCS5500-12 |
Bottle Shield Screw |
| MCS5500-14 |
Vacuum Body Adaptor |
| MCS5500-15 |
Bottle Shield |
| MCS5500-16 |
Collector Gasket |
| MCS5500-17 |
Vacuum Body "O" Ring |
| MCS5500-18 |
Vacuum Pump Nut Plate |
| MCS5500-19 |
Vacuum Pump Clamp |
| MCS5500-2 |
Filter Cover |
| MCS5500-20 |
Vacuum Pump |
| MCS5500-25 |
Short Air Line (Vacuum) |
| MCS5500-26 |
Handle "O" Ring |
| MCS5500-37 |
Hose Fitting (Male) |
| MCS5500-38 |
Vacuum Hose Grommet |
| MCS5500-39 |
Vacuum Hose Sleeve |
| MCS5500-5 |
Filter |
| MCS5500-6 |
Muffler |
| MCS5500-8 |
Collector Bottle (Replaced by MCS5400-8) |
| MCS5500-9 |
Vacuum Body |
| MCS5500-91 |
Hanger |
| MCS5600-400 |
Seal Kit |
| MCS5600-9 |
Vacuum Pump Air Line |
| MCS5800 |
Cordless Electric Rivetool Kit - incl. Tool, Battery, Charger, Nosepieces, Wrench & Carrying Case |
| MCS5800-1 |
Tool housing, complete |
| MCS5800-10 |
Jaw pusher |
| MCS5800-11 |
Jaws (3 parts) |
| MCS5800-12 |
Jaw Guide |
| MCS5800-13 |
Nose Housing |
| MCS5800-14 |
Nosepiece, 3/32" Open Rivets |
| MCS5800-14R |
Nosepiece, 3/32" Open Rivets (Retaining) |
| MCS5800-15 |
Nosepiece, 1/8" Closed End Rivets |
| MCS5800-15R |
Nosepiece, 1/8" Closed End Rivets (Retaining) |
| MCS5800-16 |
Nosepiece, 1/8" Open & 5/32" Closed |
| MCS5800-16R |
Nosepiece, 1/8" Open & 5/32" Closed (Retaining) |
| MCS5800-17 |
Nosepiece, 1/8" Open & 5/32" Closed |
| MCS5800-17R |
Nosepiece, 1/8" Open & 5/32" Closed (Retaining) |
| MCS5800-18 |
Nosepiece, 3/16" Open & Closed |
| MCS5800-18R |
Nosepiece, 3/16" Open & Closed (Retaining) |
| MCS5800-2 |
Ball screw drive assembly |
| MCS5800-20 |
Bushing |
| MCS5800-22A |
Spent mandrel tube - plastic |
| MCS5800-23 |
Steel Track |
| MCS5800-25 |
Motor, complete |
| MCS5800-26 |
Electronic control switch |
| MCS5800-27 |
Magnet holder, complete |
| MCS5800-28 |
Magnet holder screw |
| MCS5800-29 |
Spring lock washer |
| MCS5800-3 |
Drive bearing, complete |
| MCS5800-30 |
Suspension loop |
| MCS5800-31 |
Hand guard |
| MCS5800-32 |
Housing screw, short |
| MCS5800-33 |
Housing screw, long |
| MCS5800-35 |
Nosepiece bracket |
| MCS5800-36 |
Nosepiece holder |
| MCS5800-37 |
Nosepiece wrench |
| MCS5800-39 |
Spent mandrel collector, complete |
| MCS5800-4 |
Power transfer gear |
| MCS5800-40 |
Battery |
| MCS5800-42 |
Drive system, complete (Includes 2-13,15) |
| MCS5800-45 |
Battery charger |
| MCS5800-5 |
Snap ring |
| MCS5800-50 |
Steel Case |
| MCS5800-6 |
Screw |
| MCS5800-7 |
Jaw housing coupler |
| MCS5800-8 |
Scraper ring |
| MCS5800-9 |
Jaw pusher spring |
| MCS5800RR |
5800 Tools |
| N-130 |
Special Nosepiece - 3 size OE - 0.562 length |
| N-131 |
Special Nosepiece - 4 size OE - 0.437 length |
| N-132 |
Special Nosepiece - 4 size OE - 0.562 length |
| N-133 |
Special Nosepiece - 5 size OE - 0.562 length |
| N-134 |
Special Nosepiece - 5 size OE - 0.437 length |
| N-135 |
Special Nosepiece - 5 size OE - 0.312 length |
| N-137 |
Special Nosepiece - 6 size OE - 0.812 length |
| N-138 |
Special Nosepiece - 6 size OE - 0.687 length |
| N-139 |
Special Nosepiece - 6 size OE - 0.562 length |
| N-140 |
Special Nosepiece - 6 size OE - 0.437 length |
| N-23 |
Special Nosepiece - 6 size CE - 0.375 length |
| N-300 |
Special Nosepiece - 4 size OE - 0.375 length |
| N-301 |
Special Nosepiece - 4 size OE - 0.312 length |
| N-302 |
Special Nosepiece - 4 size OE - 0.750 length |
| N-308 |
Special Nosepiece - 4 size OE - 0.097 loose set |
| N-309 |
Special Nosepiece - 4 size OE - 0.500 length |
| N-314 |
Special Nosepiece - 5 size OE - 0.020 loose set |
| N-316 |
Special Nosepiece - 6 size OE - 0.020 loose set |
| N-318 |
Special Nosepiece - 6 size OE - 0.265 loose set |
| N-321 |
Special Nosepiece - 6 size OE - 0.0525 loose set |
| N-323 |
Special Nosepiece - 5 size OE - 0.594 length |
| N-324 |
Special Nosepiece - 6 size OE - 0.012 loose set |
| N-33 |
Special Nosepiece - 5 size OE - 0.375 length |
| N-332 |
Special Nosepiece - 8 size OE - 0.437 length |
| N-333 |
Special Nosepiece - 8 size OE - 0.312 length |
| N-342 |
Special Nosepiece - 4 size OE - 0.688 length |
| N-345 |
Special Nosepiece - 4 size CE Al mandrel - 0.500 length |
| N-35 |
Special Nosepiece - 6 size OE - 0.375 length |
| N-36 |
Special Nosepiece - 6 size OE - 0.500 length |
| N-361 |
Special Nosepiece - 5 size CE - 0.500 length |
| N-377 |
Special Nosepiece - 6 size OE - 1.000 length |
| N-380 |
Special Nosepiece - 4 size CE - 0.625 length |
| N-385 |
Special Nosepiece - 6 size CE - 0.350 length |
| N-386 |
Special Nosepiece - 4 size CE - 0.532 length |
| N-392 |
Special Nosepiece - 4 size OE - 0.047 loose set |
| N-393 |
Special Nosepiece - 8 size CE - 0.536 length |
| N-394 |
Special Nosepiece |
| N-399 |
Special Nosepiece - 4 size CE - 0.262 length |
| N-400 |
Special Nosepiece - 5 size CE - 0.437 length |
| N-402 |
Special Nosepiece - 4 size CE - 0.562 length |
| N-403 |
Special Nosepiece - 4 size CE - 0.437 length |
| N-406 |
Special Nosepiece - 6 size UltraGrip |
| N-407 |
Special Nosepiece - 8 size UltraGrip |
| N-410 |
Special Nosepiece - 6 size Monobolt |
| N-411 |
Special Nosepiece - 5 size OE - 0.058 loose set |
| N-414 |
Special Nosepiece - 8 size Monobolt |
| N-416 |
Special Nosepiece - 4 size CE - 0.437 length |
| N-419 |
Special Nosepiece - 6 size CE - 0.437 length |
| N-42 |
Special Nosepiece - 4 size CE - 0.500 length |
| N-43 |
Special Nosepiece - 4 size CE - 0.375 length |
| N-501 |
Special Nosepiece - 6 size T Rivets |
| N-502 |
Special Nosepiece - 4 size CE - 0.750 length |
| N-503 |
Special Nosepiece - 4 size SNS-094/93.3 rivet |
| N-504 |
Special Nosepiece - 4 size SNS-094/168 rivet |
| N-505 |
Special Nosepiece - 4 size SNS-094/M6-2 rivet |
| N-508 |
Special Nosepiece - 6 size OE - 0.562 length - concave |
| N-511 |
Special Nosepiece - 8 size OE - 0.020 loose set |
| N-523 |
Special Nosepiece - 4 size SNA -103 rivet |
| N-533 |
Special Nosepiece - 6 size CE - 1.594 length |
| N-541 |
Special Nosepiece - 6 size HR - loose set |
| NUT-M10-T5 |
Hexagon Thin Nut M10 T5 |
| NUT-M8-T5 |
Nut M8-T5 |
| O-RING-1033(1A) |
O-Ring-1033(1A) |
| O-RING-G65 |
O-Ring-G65 |
| O-RING-P12(1B) |
O-Ring P12(1B) |
| O-RING-P15(1B) |
O-Ring P15(1B) |
| O-RING-P16(1A) |
O-Ring P16(1A) |
| O-RING-P18(1B) |
O-Ring P18(1B) |
| O-RING-P22(1B) |
O-Ring P22(1B) |
| O-RING-P4(1A) |
O-Ring P4(1A) |
| O-RING-P58(1A) |
O-Ring P58(1A) |
| O-RING-P7(1A) |
O-Ring P7(1A) |
| O-RING-P9(1A) |
O-Ring P9(1A) |
| O-RING-S26(1A) |
O-Ring S26(1A) |
| PA203-001 |
ProSet® 2100 - Air Hydraulic Tool - Base model with Standard Nosepieces and Standard Air Hose |
| PA203-002 |
ProSet® 2101 - Air Hydraulic Tool - Base 2100 model with Reduce Dia. Front End Kit installed - Std. 4 in. length |
| PA203-003 |
ProSet® 2100MCS - Air Hydraulic Tool - Base 2100 model with Mandrel Collector System installed on Tool |
| PA203-004 |
ProSet® 2101MCS - Air Hydraulic Tool - Base 2101 model with Mandrel Collector System installed on Tool |
| PA203MCSRR |
|
| PA203RR |
ProSet® 2100 Tool series |
| PA220-990 |
AutoSet® 5 tool |
| PA220-991 |
AutoSet® 6 tool |
| PA220RR |
AutoSet® Tool series |
| PL-LEVERLITE |
PowerLink Leverlite™ - Long Lever Hand Riveting Tool |
| PL-PLUS |
PowerLink Plus™ - Lazy Tong Hand Riveting Tool |
| PL1500-220 |
Air Line Assembly - (Complete and assembled) |
| PL1500-26 |
Hydraulic Piston |
| PL1500-MCS-KIT |
Complete MCS Kit |
| PL30-001 |
Body |
| PL30-002 |
Handle |
| PL30-003 |
Latch |
| PL30-004 |
Handle Return Spring (PL30 only) |
| PL30-005 |
Link |
| PL30-006 |
Jaw Carrier |
| PL30-007 |
Retaining Screw |
| PL30-008 |
Jaw Pusher Spring |
| PL30-009 |
Jaw Pusher |
| PL30-010 |
Jaw |
| PL30-011 |
Fulcrum Pin |
| PL30-012 |
Bushing |
| PL30-013 |
Retaining Ring |
| PL30-014 |
Cap (PL30) |
| PL30-015 |
Nosepiece (3/32") |
| PL30-016 |
Nosepiece (1/8") |
| PL30-017 |
Nosepiece (5/32") |
| PL30-018 |
Nosepiece (3/16") |
| PL30-019 |
Wrench |
| PL30-020 |
Body Grip |
| PL30-021 |
Handle Grip |
| PL30-024 |
Metal Cap (PL30+) |
| PL30-025 |
Handle limit spring (PL30+ only) |
| PL30-026 |
Handle Return Spring (PL30+ only) |
| PL30-KIT1 |
Nosepiece Kit |
| PL30-KIT2 |
Jaw Service Kit |
| PL30-KIT3 |
Fulcrum Pin Kit |
| PL30-KIT4 |
Hand Grip Kit |
| PL30-MARINE |
Fresh Water Marine Kit |
| PL30-MRO |
MRO Kit |
| PL30-REPAIR |
Misc. Repair Kit |
| PL30+ |
PowerLink 30+ Hand Riveting Tool |
| PLP-01 |
Body |
| PLP-02 |
Nose Housing |
| PLP-03 |
Jaw Case |
| PLP-04 |
Jaws |
| PLP-06 |
Jaw Pusher |
| PLP-07 |
Jaw Pusher Spring |
| PLP-08 |
Nose Housing Lock Nut |
| PLP-09 |
Power Coupling |
| PLP-10 |
Cross Head |
| PLP-11 |
Sleeve |
| PLP-12 |
Triangle Link |
| PLP-15 |
Handle |
| PLP-30 |
Handle Stud, Nuts & Washers |
| PLP-31 |
Linkage Assembly |
| PLP-32 |
Hex bolt M6x30, Nut & Washer |
| PLP-33 |
Link Stud, Nuts, Washers & spacer |
| PRA961 |
Adaptor (PRG520A to PRH830 or A1 Head) |
| PRA961-1 |
Adaptor Housing |
| PRA961-2 |
Adaptor Draw bolt |
| PRA965 |
Adaptor (PRG540 to PRH830 or A1 Head) |
| PRA965-1 |
Adaptor Housing |
| PRA965-2A |
Adaptor Draw bolt |
| PRA967 |
Adaptor (PRG510A to PRH830 or A1 Head) |
| PRA967-1 |
Adaptor Housing |
| PRA967-2 |
Adaptor Draw bolt |
| PRA985 |
Adaptor (PRT5200 to PRH830 or A1 Head) |
| PRA985-1 |
Adaptor Housing |
| PRA985-2100 |
Adaptor (ProSet® 2100 to PRH830 or A1 Head) |
| PRG111 |
Hand Riveting Tool |
| PRG14 |
Jaw Pusher for 3/32" thru 3/16" Rivets |
| PRG402-02 |
Jaws - 2.0 mm diam. Micro Rivets |
| PRG402-100 |
Fulcrum Pin Clip (Supersedes FCL 473) |
| PRG402-101 |
Jaw Pusher Spring |
| PRG402-102 |
Handle Return Spring |
| PRG402-11 |
Nosepiece Housing |
| PRG402-12A |
Handle Latch |
| PRG402-14 |
Handle Bushing |
| PRG402-3 |
Pulling Head |
| PRG402-4 |
Pulling Head Pin |
| PRG402-6 |
Riveter Support |
| PRG402-7 |
Jaw Guide (Small) |
| PRG402-8A |
Jaws |
| PRG402-8SS |
Jaws for 1/8" Stainless Steel Rivets |
| PRG402-9 |
Handle |
| PRG430-2 |
Nosepiece Housing Insert |
| PRG440-10 |
Long Link |
| PRG440-100 |
Handle Tension Spring Washer (Supersedes WL2128T) |
| PRG440-105 |
Draw Pin (Supersedes PL6248P) |
| PRG440-11 |
Short Link |
| PRG440-110 |
Jaw Pusher Spring (Supersedes SPGL358S) |
| PRG440-115 |
Handle Roll Pin (Supersedes PL6247P) |
| PRG440-120 |
Spacer (Supersedes WL2129T) |
| PRG440-15 |
Roller |
| PRG440-2+ |
Power Coupling Assembly |
| PRG440-20+ |
Handle Assembly |
| PRG440-21 |
Handle Bushing |
| PRG440-26A |
Link Pin 1 1/4" Long |
| PRG440-27A |
Link Pin 1 1/8" Long |
| PRG440-28A |
Link Pin 1" Long |
| PRG440-29A |
Pivot Pin |
| PRG440-32 |
Nose Housing (Supersedes PRG440-23A) |
| PRG440-33 |
Body Assembly |
| PRG440-4 |
Outside Lever Left Hand |
| PRG440-5 |
Outside Lever Right hand |
| PRG440-7 |
Inside Lever Left Hand |
| PRG440-8 |
Inside Lever Right hand |
| PRG450-010 |
Body |
| PRG450-060 |
Handle Grip |
| PRG450-080 |
Handle Assembly |
| PRG450-090 |
Jam Nut |
| PRG450-100 |
Link |
| PRG450-110 |
Nose Housing |
| PRG450-120 |
Pivot Stud |
| PRG450-130 |
Washer (Supersedes WL2078T) |
| PRG450-145 |
Power Coupling Assembly |
| PRG450-150 |
Jaw Pusher Spring |
| PRG510-102 |
Piston Rod Screw |
| PRG510-103 |
Piston Rod Washer |
| PRG510-104 |
Piston Rod Seal Washer |
| PRG510-105 |
Spring Washer |
| PRG510-106 |
Valve Seat Seal |
| PRG510-107 |
Valve Ring Seal |
| PRG510-109 |
Valve Ring Seal Washer |
| PRG510-110 |
Piston Rod Lock washer |
| PRG510-111 |
Valve Plate Screw Lock washer |
| PRG510-112 |
Valve Tube Cap |
| PRG510-113 |
Piston Rod Fulcrum |
| PRG510-114 |
Piston Rod Seal |
| PRG510-115 |
Valve Plate Screw |
| PRG510-116 |
Base Screw |
| PRG510-117 |
Housing Cap Screw |
| PRG510-118 |
Trigger Pin |
| PRG510-119 |
Piston Rod Pin |
| PRG510-120 |
Trigger Fulcrum Pin |
| PRG510-122 |
Valve Ring Seal Retainer |
| PRG510-123 |
Jaw Pusher Spring |
| PRG510-124 |
Piston Rod Return Spring |
| PRG510-125 |
Piston Rod Screw Wrench (obsolete) |
| PRG510-126 |
Bell Crank Fulcrum |
| PRG510-130 |
Jaw Lube (6 oz) |
| PRG510-132 |
Mandrel Guide (Vacuum) |
| PRG510-133 |
Housing Cap Vacuum |
| PRG510-170 |
Trigger Assembly |
| PRG510-180 |
Valve Assembly |
| PRG510-230 |
Jaw Service Kit |
| PRG510-31 |
Housing (obsolete) |
| PRG510-33 |
Base (obsolete) |
| PRG510-34 |
Nose Housing Insert |
| PRG510-35 |
Trigger |
| PRG510-36A |
Trigger Lever |
| PRG510-37 |
Valve Tube |
| PRG510-38 |
Valve Seat |
| PRG510-39+ |
Valve Plate |
| PRG510-400 |
Seal Kit (PRG510A) |
| PRG510-41+ |
Piston Rod |
| PRG510-42 |
Spring Cap |
| PRG510-43 |
Piston |
| PRG510-44 |
Piston Seal |
| PRG510-45 |
Bell Crank |
| PRG510-46 |
Bell Crank Bushing, Outer |
| PRG510-47 |
Bell Crank Bushing, Center |
| PRG510-48 |
Pulling Head |
| PRG510-49 |
Pulling Head Fulcrum |
| PRG510-50 |
Mandrel Tube |
| PRG510-52A |
Nose Housing |
| PRG510-54 |
Piston Bumper |
| PRG510-56 |
Deflector |
| PRG510-58 |
Hose Adaptor (obsolete) |
| PRG510-69 |
Mandrel Bag |
| PRG510A |
Pneumatic Riveting Tool - Base Model with standard.Nosepieces but without Air Line Assembly |
| PRG510A-31 |
Housing |
| PRG510A-33 |
Base |
| PRG510A-59 |
Adaptor Fitting (1/8 NPT to 1/4 NPT) |
| PRG510A-PLUS |
PRG510A as above PLUS Air Line Assembly,.PRT5200-220 & Jaw Service Kit, PRG510-230 |
| PRG510RR |
510 & 510A tool series |
| PRG511-001 |
Pulling Head Adaptor Assembly |
| PRG511-002 |
Housing Cap & Mandrel Guide Kit |
| PRG511-003 |
Conversion Kit for PRG510 to PRG511 Tool |
| PRG511-010 |
Jaw Pusher Spring Tube (511A) |
| PRG511-022 |
Pulling Head Adaptor (511A) |
| PRG511-050 |
Mandrel Tube (511A) |
| PRG511-051 |
Mandrel Guide |
| PRG511-052 |
Nose Housing (511A) |
| PRG511-076 |
Housing Cap |
| PRG511A |
Pneumatic Riveting Tool with long nose housing,.standard Nosepieces and standard Air Hose |
| PRG520-100 |
Retainer Plate Screws |
| PRG520-101 |
Retaining Ring - Seal Sleeve |
| PRG520-105 |
Retaining Ring |
| PRG520-106 |
O-Ring - Pot |
| PRG520-33 |
Jaw Pusher |
| PRG520-37 |
Air Line (Replaced by PRG540-39) |
| PRG520-45 |
Restrictor |
| PRG520-47 |
O-Ring - SS Wiper |
| PRG520-49 |
O-Ring - End Cap Outside |
| PRG520-60 |
Passage Seal (Old style) |
| PRG520-63 |
Rod Seal (Front) |
| PRG520-68 |
Elbow Fitting |
| PRG520-69 |
Air Line Fitting (Replaced by PRT5200-90) |
| PRG520-70 |
Air Line Fem. Fitting (Replaced by PRG540-40) |
| PRG520-84 |
Ram Seal -(Replaced by PRT5200-84) |
| PRG520-85 |
Ram Seal Retainer |
| PRG520-89 |
O-Ring - SS Outside |
| PRG520A4 |
Toggle Pin |
| PRG520A8 |
Air Line O-Clamps |
| PRG540 |
Air Hydraulic Riveting Tool - Base Model with Standard Nosepieces and Standard Air Hose Assy. |
| PRG540-10 |
Seal Sleeve |
| PRG540-100 |
Ram Screw |
| PRG540-101 |
Trigger |
| PRG540-102 |
Fill Screw Washer |
| PRG540-104 |
Return Spring |
| PRG540-105 |
Jaw Pusher Spring |
| PRG540-106 |
Exhaust Tube Pin |
| PRG540-107 |
Trigger Roll Pin |
| PRG540-108 |
Piston Seal Retainer |
| PRG540-109 |
Wiper Retainer Washer |
| PRG540-11 |
Seal Sleeve Snap Ring |
| PRG540-110 |
Spring Retainer Washer (Front) |
| PRG540-111 |
Seal Retainer Washer |
| PRG540-112 |
Restrictor Seat |
| PRG540-113 |
Ram Seal Washer |
| PRG540-114 |
O" Ring |
| PRG540-115 |
Valve Plug Seal |
| PRG540-116 |
Piston Rod Wiper |
| PRG540-117 |
Hydraulic Piston "O" Ring |
| PRG540-118 |
Sleeve Retainer "O" Ring |
| PRG540-119 |
Ram "O" Ring |
| PRG540-12 |
Hydraulic Piston |
| PRG540-120 |
Lock Washer |
| PRG540-121 |
Seal Retaining Ring |
| PRG540-122 |
Fill Screw |
| PRG540-123 |
Intensifier Chamber Screw |
| PRG540-124 |
Return Spring Snap Ring |
| PRG540-125 |
Piston Rod Snap Ring |
| PRG540-126 |
Piston Wiper |
| PRG540-127 |
Oil Replacement Screw (3/8"-24) |
| PRG540-13 |
Rod Seal Retainer |
| PRG540-130 |
Hydraulic Oil (Quarts Only) |
| PRG540-14 |
Hydraulic Piston Rod |
| PRG540-15 |
Piston Seal |
| PRG540-16 |
Jaw Pusher for Three Jaw Set (13300) |
| PRG540-2 |
Restrictor |
| PRG540-21 |
Pulling Head Adaptor |
| PRG540-22 |
Nose Housing |
| PRG540-24 |
Ram |
| PRG540-25 |
Ram Seal Backup Ring |
| PRG540-26A |
Ram Seal |
| PRG540-27 |
Air Piston |
| PRG540-28 |
Air Piston "V" Block Seal |
| PRG540-29 |
Intensifier Chamber |
| PRG540-3 |
Restrictor Housing |
| PRG540-30 |
Deflector |
| PRG540-31 |
Handle Assembly |
| PRG540-33 |
Exhaust Tube |
| PRG540-34 |
Exhaust Tube Toggle |
| PRG540-35 |
Valve Plug |
| PRG540-36 |
Air Valve |
| PRG540-37 |
Air Line Strap |
| PRG540-38 |
Air Line Fitting |
| PRG540-39 |
Air Line - 6' Length |
| PRG540-39FT |
Air Line - Per Foot Price |
| PRG540-4 |
Restrictor Housing Seal |
| PRG540-40 |
Hose Female Fitting |
| PRG540-400 |
Seal Kit (PRG540) |
| PRG540-43 |
Mandrel Guide |
| PRG540-44 |
Jaws for 1/4" Rivets |
| PRG540-44SS |
Jaws - Special Applications |
| PRG540-45 |
Air Line "O" Clamp |
| PRG540-46 |
Jaws for 3/32" thru 3/16" Rivets |
| PRG540-46SS |
Jaws - Special Applications |
| PRG540-47 |
Mandrel Catcher |
| PRG540-5 |
Ram Sleeve |
| PRG540-50 |
Piston Rod (Vacuum - Remote MCS) |
| PRG540-7A |
Sleeve Retaining Plate |
| PRG540-8 |
Pusher/Mandrel Tube Assy. - 1/4" Rivets (obsolete) |
| PRG540RR |
540 Tools series |
| PRG541 |
PRG540 w/PRG541-001 Front End Extension Kit Installed - 6 inch length |
| PRG541-001 |
Front End Extension Kit for PRG540 Rivetool |
| PRG541-010 |
Nose Housing for PRG541-001 Front End Kit |
| PRG541-011 |
Piston Rod Extension for PRG541-001 |
| PRG541-012 |
Pulling Head Adaptor for PRG541-001 |
| PRG544 |
Air Hydraulic Riveting Tool - PRG540 Tool set it up for 1/4" Rivets |
| PRG545-3 |
Trigger Spring |
| PRG740-11A |
Jaw Guide |
| PRG740-7A |
Jaw Pusher for 1/4" Rivets |
| PRH820-11A |
Jaw Guide |
| PRH824-7 |
Jaw Pusher |
| PRH830 |
Midget Corner Head |
| PRH830-1 |
Housing |
| PRH830-10 |
Lock Nut (Formerly NL 1402K) |
| PRH830-11 |
Cover Pin (Formerly PL 6104P) |
| PRH830-12 |
Link Pin (Formerly PL 6479P) |
| PRH830-2 |
Jaw Pusher |
| PRH830-3 |
Yoke |
| PRH830-4 |
Bell Crank |
| PRH830-5A |
Link |
| PRH830-7 |
Coupling |
| PRH830-8A |
Cover Strip |
| PRH830-9 |
Jaw Pusher Spring (Formerly SPGL592S) |
| PRH840 |
Medium Corner Head |
| PRH840-1 |
Head Housing |
| PRH840-10 |
Draw Bolt Assembly (PRG510A, PRG520A Only) |
| PRH840-11 |
Jaw Guide |
| PRH840-12 |
Jaw Pusher Spring |
| PRH840-13 |
Corner Head Adaptor (PRG510A Only) |
| PRH840-14 |
Adaptor Body (PRG510A Only) |
| PRH840-15 |
Draw Bolt Adaptor (PRG510A, PRG520A Only) |
| PRH840-16 |
Adaptor Screw |
| PRH840-17 |
Draw Bolt Screw |
| PRH840-18 |
Draw Bolt |
| PRH840-19 |
Draw Bolt Pin |
| PRH840-2 |
Nose Housing |
| PRH840-20 |
Adaptor Jam Nut |
| PRH840-2100 |
Adaptor (ProSet® 2100 to PRH840) |
| PRH840-23 |
Corner Head Adaptor (PRG520A Only) |
| PRH840-24 |
Adaptor Body (PRG520A Only) |
| PRH840-25 |
Housing Cover |
| PRH840-26 |
Housing Cover Screw |
| PRH840-27 |
Cover Screw Spacer |
| PRH840-3 |
Pulling Head Adaptor |
| PRH840-30 |
Corner Head Adaptor (2100 & 5200 Only) |
| PRH840-31 |
Adaptor Body (2100 & 5200 Only) |
| PRH840-3400 |
3400 Adaptor Kit for PRH840.. |
| PRH840-40 |
Draw Bolt Assembly (5200, 540, 5400 & ProSet 2100) |
| PRH840-43 |
Corner Head Adaptor (PRG540 Only) |
| PRH840-44 |
Adaptor Body (PRG540 Only) |
| PRH840-45 |
Draw Bolt Adaptor (5200, 540, 5400 & ProSet 2100) |
| PRH840-50 |
Adaptor Body (PRT5400 Only) |
| PRH840-51 |
Corner Head Adaptor (PRT5400 Only) |
| PRH840-510 |
Adaptor (PRG510 & PRG510A to PRH840) |
| PRH840-520 |
Adaptor (PRG520A to PRH840) |
| PRH840-5200 |
Adaptor (PRT5200 to PRH840) |
| PRH840-540 |
Adaptor (PRG540 to PRH840) |
| PRH840-5400 |
Adaptor (PRT5400 to PRH840) |
| PRH840-6 |
Bell Crank Bushing |
| PRH840-7 |
Bell Crank |
| PRH840-8 |
Bell Crank Fulcrum |
| PRH840-9 |
Bell Crank Spacer |
| PRH850 |
Heavy Duty Corner Head |
| PRH850-1 |
Head Housing |
| PRH850-11 |
Jaw Guide |
| PRH850-12 |
Jaw Pusher Spring |
| PRH850-17 |
Draw Bolt Screw |
| PRH850-18 |
Draw Bolt |
| PRH850-19 |
Draw Bolt Pin |
| PRH850-2 |
Nose Housing |
| PRH850-25 |
Housing Cover |
| PRH850-3 |
Pulling Head Adaptor |
| PRH850-30 |
Adaptor Body (PRT5400 Only) |
| PRH850-31 |
Corner Head Adaptor (PRT5400 Only) |
| PRH850-3400 |
3400 Adaptor Kit for PRH850.. |
| PRH850-40 |
Draw Bolt Assembly |
| PRH850-43 |
Corner Head Adaptor (PRG540 Only) |
| PRH850-44 |
Adaptor Body (PRG540 Only) |
| PRH850-540 |
Adaptor (PRG540 to PRH850) |
| PRH850-5400 |
Adaptor (PRT5400 to PRH850) |
| PRH850-6 |
Bell Crank Bushing |
| PRH850-7 |
Bell Crank |
| PRH850-8 |
Bell Crank Fulcrum |
| PRH850-9 |
Bell Crank Spacer |
| PRK830-2100 |
PRH830 Head + Adaptor PRA985-2100 for ProSet® 2100 |
| PRK830-510 |
PRH830 Head + Adaptor PRA967 for PRG510 & PRG510A |
| PRK840-2100 |
PRH840 Head + Adaptor PRA840-2100 for ProSet 2100 |
| PRK840-510 |
PRH840 Head + Adaptor PRH840-510 for PRG510 & PRG510A |
| PRK840-5200 |
PRH840 Head + Adaptor PRH840-5200 for PRT5200 |
| PRK840-540 |
PRH840 Head + Adaptor PRH840-540 for PRG540 |
| PRK840-5400 |
PRH840 Head + Adaptor PRH840-5400 for PRT5400 |
| PRK850-540 |
PRH850 Head + Adaptor PRH850-5400 for PRG540 |
| PRK850-5400 |
PRH850 Head + Adaptor PRH850-5400 for PRT5400 |
| PRL600-10 |
O-Ring PRL600-10 |
| PRM530-40 |
Spring Pin 3x20 AW |
| PRN114 |
Nosepiece 1/8" Open End Rivets |
| PRN115 |
Nosepiece 5/32" Open End Rivets |
| PRN116 |
Nosepiece 3/16" Open End Rivets |
| PRN214 |
Nosepiece 2.0 mm Open End Micro Rivets |
| PRN314 |
Nosepiece 3/32" Open End Rivets |
| PRN414 |
Nosepiece 7/64" & 1/8" Open End Rivets |
| PRN424 |
Nosepiece 1/8" Closed End Aluminum Rivet with Steel Mandrel |
| PRN434 |
Nosepiece 1/8" Close End Rivets with Aluminum Mandrel |
| PRN4HR |
Nosepiece for 1/8" Steel & SS HR rivets |
| PRN514 |
Nosepiece 5/32" Open End Rivets |
| PRN524 |
Nosepiece 5/32" Close End Rivets with Steel Mandrel |
| PRN530-49 |
Hex Wrench |
| PRN534 |
Nosepiece 5/32" Close End Rivets with Aluminum Mandrel |
| PRN5HR |
Nosepiece for 5/32" Steel & SS HR rivets |
| PRN611 |
Nosepiece 3/16" Open End Rivets - Short Shank |
| PRN614 |
Nosepiece 3/16" Open End Rivets |
| PRN624 |
Nosepiece 3/16" Closed End Aluminum Rivet.with Steel Mandrel |
| PRN625 |
Nosepiece 3/16" "T-Rivet" |
| PRN634 |
Nosepiece 3/16" Closed Aluminum Rivet .with Aluminum Mandrel |
| PRN6HR |
Nosepiece for 3/16" Steel & SS HR rivets |
| PRN811 |
Nosepiece 1/4" Open End Rivets |
| PRN822 |
Nosepiece 1/4" Closed End Aluminum Rivet.with Steel Mandrel |
| PRN825 |
Nosepiece 1/4" "T-Rivet" |
| PRN826 |
Nosepiece 1/4" "T-Rivet" (Recessed Head) |
| PRN830 |
Nosepiece 1/4" "T-Rivet" |
| PRN840-100 |
|
| PRN840-510 |
|
| PRN8HR |
Nosepiece for 1/4" Steel & SS HR rivets |
| PROSET1600 |
ProSet® 1600 - Air Hydraulic Tool - Base model with Standard Nosepieces and Standard Air Hose |
| PROSET1600MCS |
ProSet® 1600MCS - Air Hydraulic Tool - Base 2100 model with Mandrel Collector System installed on Tool |
| PROSET1600MCSRR |
|
| PROSET1600RR |
ProSet® 1600 Tool series |
| PROSET2500 |
ProSet® 2500 - Air Hydraulic Tool - Base model with Standard Nosepieces and Standard Air Hose |
| PROSET2500MCS |
ProSet® 2500MCS - Air Hydraulic Tool - Base 2500 model with Mandrel Collection System installed on Tool |
| PROSET2501 |
ProSet™ 2501 - Air Hydraulic Tool - Base 2500 model with Reduce Dim. Nosehousing installed, standard Nosepieces and Standard Air Hose |
| PROSET2501MCS |
ProSet™ 2501MCS - Air Hydraulic Tool - Base 2501 model with Mandrel Collector System installed on Tool |
| PROSET2502 |
ProSet™ 2502 - Air Hydraulic Tool - Base 2500 model with Extended 5.5" Std Diam. Nosehousing installed, standard Nosepieces and Standard Air Hose |
| PROSET2502MCS |
ProSet™ 2502MCS - Air Hydraulic Tool - Base 2502 model with Mandrel Collector System installed on Tool |
| PROSET3400 |
ProSet® 3400 - Air Hydraulic Tool - Base model with Standard Nosepieces and Standard Air Hose |
| PROSET3400MCS |
ProSet® 3400MCS - Air Hydraulic Tool - Base 3400 model with Mandrel Collection System installed on Tool |
| PRP10 |
Collet Spring |
| PRP100 |
Spring Screw (Supersedes SL 7D7) |
| PRP101 |
Jaw Pusher Washer (Supersedes WL 1995T) |
| PRP11 |
Collet Jaw for 1/8" Dia. Rivet |
| PRP12A |
Collet Jaw for 5/32" Dia. Rivet |
| PRP14 |
Pin for Securing 24A to 25A |
| PRP20 |
Guide Pin |
| PRP23A |
Support |
| PRP24A |
Lever |
| PRP25A |
Collet Case |
| PRP26A |
Hand Riveting Tool |
| PRP27 |
Collet Jaw for 3/32" Open End & 1/8" Dia..Closed End Rivet with Steel Mandrel |
| PRP30 |
Jaw Pusher |
| PRP31 |
Nosepiece Nut for 3/32" Dia. Rivet |
| PRP32 |
Nosepiece Nut for 1/8" Dia. Rivet |
| PRP33A |
Nosepiece Nut for 5/32" Dia. Rivet |
| PRP39 |
Nosepiece Nut for 1/8" Dia. Closed End.Rivet with Steel Mandrel |
| PRP40 |
Fulcrum Pin |
| PRP41 |
Collet Case with PRP100 Assembled |
| PRT4000-01 |
Nose Housing |
| PRT4000-02 |
Jaw Pusher with tube |
| PRT4000-03 |
Hydraulic Piston (Use PL1500-26) |
| PRT4000-04A |
Handle |
| PRT4000-05 |
Seal Sleeve |
| PRT4000-06 |
Fill Screw |
| PRT4000-07 |
Fill Washer |
| PRT4000-08 |
Return Spring |
| PRT4000-09 |
Tool Hanger |
| PRT4000-10 |
End Cap |
| PRT4000-11 |
Trigger |
| PRT4000-12 |
Trigger Rod |
| PRT4000-13 |
Trigger Lever Cap |
| PRT4000-14 |
Trigger Lever |
| PRT4000-15 |
Cap Assembly |
| PRT4000-17 |
Lock Nut |
| PRT4000-18A |
Ram |
| PRT4000-20A |
Rubber Cushion |
| PRT4000-21 |
Ram Washer |
| PRT4000-22 |
Air Piston Washer |
| PRT4000-24 |
Air Piston |
| PRT4000-25 |
Chamber |
| PRT4000-26 |
Air Chamber Cap |
| PRT4000-27 |
Valve Cap |
| PRT4000-28 |
Valve Pusher |
| PRT4000-29 |
Valve Spring |
| PRT4000-30 |
Copper Washer |
| PRT4000-31 |
Valve |
| PRT4000-32 |
Spring |
| PRT4000-33 |
Spanner |
| PRT4000-34 |
Cap Spanner |
| PRT4000-50 |
Jaw pusher - 2.0 mm diam rivets |
| PRT5200-10 |
Seal Sleeve |
| PRT5200-11 |
Jaw Pusher for 13300 Jaws (3/32"-1/8" only) |
| PRT5200-12 |
Jaw Pusher/Mandrel Tube Assembly for Three Jaw Set.( Use with 3/32" and 1/8" Rivets) |
| PRT5200-14 |
Hydraulic Piston Rod |
| PRT5200-15 |
Piston Seal (2 pc. Assembly) |
| PRT5200-160 |
Pulling Head Assembly |
| PRT5200-19 |
Seal Retainer Washer |
| PRT5200-20 |
Seal Snap Ring |
| PRT5200-21 |
Pulling Head Adaptor |
| PRT5200-22 |
Nose Housing |
| PRT5200-220 |
Air Line Assembly - (Complete and assembled) |
| PRT5200-25 |
Intensifier Assembly (Replaced by PRT5200-26) |
| PRT5200-26 |
Intensifier Assembly |
| PRT5200-28 |
Air Piston Seal |
| PRT5200-29 |
Intensifier Chamber |
| PRT5200-30 |
Intensifier Chamber Sleeve |
| PRT5200-31 |
Handle (Replaced by DP203-031) |
| PRT5200-32 |
Trigger |
| PRT5200-33 |
Spring Pin - Trigger |
| PRT5200-34 |
Jaw Pusher - Three Jaw System (13300 Jaws) |
| PRT5200-35 |
Valve Plug |
| PRT5200-36 |
Handle Cap |
| PRT5200-37 |
Handle Cap Screw |
| PRT5200-4 |
Jaw Pusher/Mandrel Tube Assembly |
| PRT5200-400 |
Seal Kit (PRT5200) |
| PRT5200-42 |
Rear Clamp (Replaced by PRT5200-60 & 61) |
| PRT5200-43 |
Front Clamp (Replaced by PRT5200-60 & 61) |
| PRT5200-46 |
Ram Sleeve |
| PRT5200-47 |
Restrictor Seat |
| PRT5200-48 |
Retainer Plate - Ram Sleeve |
| PRT5200-50 |
Pressure Regulator Assembly |
| PRT5200-55 |
Air Valve Assembly (Includes: PRG540-117 (x2)) |
| PRT5200-59 |
O-Ring - Ram Sleeve |
| PRT5200-60 |
Left Clamp |
| PRT5200-61 |
Right Clamp |
| PRT5200-62 |
Front Clamp Screw |
| PRT5200-63 |
Rear Clamp Screw |
| PRT5200-8 |
Rod Seal |
| PRT5200-84 |
Ram Seal |
| PRT5200-90 |
Air Line Fitting |
| PRT5200-91 |
Hanger |
| PRT5200RR |
5200 Tools series |
| PRT5201-001 |
Small Diameter Front End Kit for PRT5200.Rivetool - Standard 4 inch Length |
| PRT5201-003 |
|
| PRT5201-18 |
Pulling Head Adaptor for 6 Inch PRT5201-004 Front End Kit |
| PRT5201-19 |
Pulling Head Adaptor for 8 Inch PRT5201-005 Front End Kit |
| PRT5201-20 |
Pulling Head Adaptor for 8 Inch PRT5201-003 Front End Kit |
| PRT5201-21 |
Pulling Head Adaptor for PRT5201-001 and PRT5201-002 Front End Kits |
| PRT5201-22 |
Nose Housing for PRT5201-001 Front End Kit |
| PRT5201-23 |
Nose Housing for PRT5201-002 Front End Kit |
| PRT5201-24 |
Nose Housing for PRT5201-003 Front End Kit |
| PRT5201-25 |
Nose Housing for PRT5201-004 Front End Kit |
| PRT5201-26 |
Nose Housing for PRT5201-005 Front End Kit |
| PRT5230A |
|
| PRT5250-10 |
Safety Plug (Old style) |
| PRT5250-11 |
O-Ring (Passage Cover) (Old style) |
| PRT5250-12 |
Mandrel Slide (Old style) |
| PRT5250-16 |
Adaptor Bushing (PRT5250A) |
| PRT5250-2 |
Mandrel Passage (Old style) |
| PRT5250-22 |
Nose Housing - Standard |
| PRT5250-23 |
Seal Bushing |
| PRT5250-24 |
Tapered Bushing (1/8" rivets) |
| PRT5250-25 |
Gasket O-ring |
| PRT5250-26 |
Tapered Bushing (5/32" & 3/16" rivets) |
| PRT5250-27 |
O-ring (slide) |
| PRT5250-28 |
Passage Body |
| PRT5250-3 |
Passage Cover (Old style) |
| PRT5250-31 |
Handle |
| PRT5250-32 |
Trigger Lever |
| PRT5250-33 |
Lever Spring Pin |
| PRT5250-4 |
Air Line Swivel |
| PRT5250-400 |
Seal Kit (Replaced by PRT5250A-400) |
| PRT5250-42 |
Rear Clamp |
| PRT5250-43 |
Front Clamp |
| PRT5250-48 |
Ram Sleeve Retainer Plate |
| PRT5250-49 |
Caution / Name Label |
| PRT5250-50 |
Air Regulator Assembly |
| PRT5250-51 |
Retainer Plate Gasket |
| PRT5250-8 |
MCS Adaptor Assy. for 1/8" Rivets (Old style) |
| PRT5250-82 |
Slide Assembly |
| PRT5250-86 |
Swivel Spring Pin |
| PRT5250-87 |
O-Ring (Swivel) |
| PRT5250-89 |
Pressure Plug |
| PRT5250-9 |
MCS Adaptor Assy. for 5/32" & 3/16" Rivets (Old style) |
| PRT5250-91 |
Hanger |
| PRT5250-92 |
Mandrel Passage Set Screw |
| PRT5250-94 |
Retainer Plate Screw |
| PRT5250-96 |
Cover Screw (Old style) |
| PRT5250-97 |
Mandrel Passage Screw |
| PRT5250-98 |
Hose Fitting (5/32" & 3/16" rivets) |
| PRT5250-99 |
Hose Fitting (1/8" rivets) |
| PRT5250A |
In-line Air Hydraulic Riveting Tool - Base Model with Standard Nosepieces and Standard Air Hose |
| PRT5250A-400 |
Seal Kit (PRT5250 & PRT5250A) |
| PRT5250A-98 |
Conversion Kit (PRT5250 to PRT5250A) |
| PRT5250RR |
5250 & 5250A Tools series |
| PRT5251-22 |
Nose Housing Reduce Diameter (vented 4" length) |
| PRT5251A |
PRT5250A w/PRT5201-001 Small Dia. Front End Ext. Kit Installed - Standard 4 inch length |
| PRT5252-22 |
Nose Housing Reduce Diameter (vented 6" length) |
| PRT5252A |
PRT5250A w/PRT5201-002 Small Dia. Front End Ext. Kit Installed - 6 inch length |
| PRT5253-22 |
Nose Housing Reduce Diameter (vented 8" length) |
| PRT5253A |
PRT5250A w/PRT5201-003 Small Dia. Front End Ext. Kit Installed - 8 inch length |
| PRT5254-22 |
Nose Housing (vented 6" length) |
| PRT5254A |
PRT5250A w/PRT5201-004 Standard Dia. Front End Ext. Kit Installed - 6 inch length |
| PRT5255-22 |
Nose Housing (vented 8" length) |
| PRT5255A |
PRT5250A w/PRT5201-005 Standard Dia. Front End Ext. Kit Installed - 8 inch length |
| PRT5300-10 |
Seal Sleeve (Obsolete) |
| PRT5300-11 |
Sleeve Retaining Ring |
| PRT5300-12 |
Hydraulic Piston (Obsolete) |
| PRT5300-15 |
Piston Seal (Obsolete) |
| PRT5300-16 |
Piston Wiper (Obsolete) |
| PRT5300-17 |
Seal Retainer Washer (Obsolete) |
| PRT5300-18 |
Sleeve "O" Ring |
| PRT5300-19 |
Seal Retainer Washer |
| PRT5300-20 |
Seal Retainer Ring |
| PRT5300-21 |
Pulling Head Adaptor |
| PRT5300-23 |
Chamber Cover |
| PRT5300-25 |
Air Valve Plunger |
| PRT5300-26 |
Grommet |
| PRT5300-27 |
Air Piston |
| PRT5300-28 |
Air Piston Seal |
| PRT5300-32 |
Trigger |
| PRT5300-33 |
Trigger Cable |
| PRT5300-34 |
Trigger Toggle |
| PRT5300-36 |
Trigger Cable Pin |
| PRT5300-37 |
Cover Screw |
| PRT5300-42 |
Clamp Left |
| PRT5300-43 |
Clamp Right |
| PRT5300-45 |
Air Valve Retaining Fitting |
| PRT5300-46 |
Clamp Screw Front |
| PRT5300-48 |
Trigger Return Spring |
| PRT5300-8 |
Rod Seal |
| PRT5300RR |
5300 Tools series |
| PRT540-43 |
|
| PRT540-71 |
|
| PRT5400 |
Air Hydraulic Riveting Tool - Base Model with Standard Nosepieces and Standard Air Hose |
| PRT5400-10 |
Seal Sleeve |
| PRT5400-14 |
Hydraulic Piston Rod |
| PRT5400-15 |
Piston Seal |
| PRT5400-2 |
Restrictor |
| PRT5400-21 |
Pulling Head Adaptor |
| PRT5400-22 |
Nose Housing - Standard Stroke Version |
| PRT5400-25 |
Intensifier Assembly |
| PRT5400-26 |
Grommet |
| PRT5400-28 |
Air Piston Seal |
| PRT5400-29 |
Intensifier Chamber - Standard Stroke Version |
| PRT5400-30 |
Intensifier Chamber Sleeve - Standard Version |
| PRT5400-300 |
Conversion Kit (PRT5400 to PRT5400LS) |
| PRT5400-31 |
Handle |
| PRT5400-36 |
Handle Cap |
| PRT5400-400 |
Seal Kit (PRT5400) |
| PRT5400-42 |
Right Clamp |
| PRT5400-43 |
Left Clamp |
| PRT5400-46 |
Ram Sleeve |
| PRT5400-47 |
Restrictor Seat |
| PRT5400-48 |
Retainer Plate |
| PRT5400-49 |
O-Ring |
| PRT5400-5 |
|
| PRT5400-50 |
Pressure Regulator Assembly |
| PRT5400-59 |
O-Ring |
| PRT5400-70 |
Intensifier Chamber Sleeve - Long Stroke |
| PRT5400-72 |
Nose Housing - Long Stroke Version |
| PRT5400-79 |
Intensifier Chamber - Long Stroke Version |
| PRT5400-84 |
Ram Seal |
| PRT5400-89 |
O-Ring |
| PRT5400-9 |
Wiper Retainer Washer |
| PRT5400LS |
Air Hydraulic Riveting Tool - Long Stroke Model with Standard Nosepieces and Standard Air Hose |
| PRT5400RR |
54000 Tools series including Long Stroke version |
| PRT5401-004 |
Standard Diameter Front End Extension Kit for.PRT5400 Rivetool - 8 Inch Length |
| PRT5401-004LS |
Standard Diameter Front End Extension Kit for.PRT5400LS Rivetool - 8 Inch Length |
| PRT5404 |
PRT5400 w/PRT5401-004 Front End Ext. Kit Installed - 8 inch length |
| PRT5404LS |
PRT5400LS w/PRT5401-004LS Front End Ext. Kit Installed - 8 inch length |
| PRT5500-107 |
Trigger Pin |
| PRT5500-112 |
Clamp Screw (Old style) ? |
| PRT5500-113 |
Clamp Nut |
| PRT5500-12 |
Hydraulic Piston |
| PRT5500-21 |
Pulling Head Adaptor |
| PRT5500-55 |
Air Valve (Obsolete) |
| PRT5500-59 |
Air Valve "O" Ring |
| PRT5500-6 |
Jaw Pusher (3/32"-3/16") |
| PRT5500-63 |
Hose Screw Plug |
| PRT5500-64 |
Air Valve Retaining Ring |
| PRT5500-7 |
Jaw Pusher for Three Jaw System (13300 Jaw) |
| PRT5500-76 |
Handle Cap |
| PRT5500-77 |
Handle Gasket |
| PRT5500-78 |
Handle Cap Screw (PRT5600) |
| PRT5500-8 |
Jaw Pusher (1/4" Dia. Rivets) |
| PRT5500-91 |
Hanger |
| PRT5500-93 |
Trigger Rod Check Nut |
| PRT5500-98 |
Trigger Rod Shoe |
| PRT5501-11 |
Pulling Head Adaptor for PRT5601-001 and PRT5601-002 Front End Kits (Obsolete) |
| PRT5501-12 |
Pulling Head Extension for PRT5601-001 (Obsolete) |
| PRT5600-14 |
Hydraulic Piston Rod (Obsolete) |
| PRT5600-22 |
Nose Housing |
| PRT5600-24 |
Ram |
| PRT5600-29 |
Intensifier Chamber (Obsolete) |
| PRT5600-30 |
Intensifier Chamber Sleeve |
| PRT5600-31 |
Handle (Obsolete) |
| PRT5600-35 |
Trigger Rod |
| PRT5600-40 |
Trigger Rod Cover |
| PRT5600-400 |
Seal Kit (Obsolete) |
| PRT5600-8 |
Pusher/Mandrel Tube Assy. - 1/4" Rivets (Obsolete) |
| PRT5601-22 |
Nose Housing for PRT5601-001 Front End Kit (Obsolete) |
| PRT5601-23 |
Nose Housing for PRT5601-002 Front End Kit (Obsolete) |
| PS15 |
Pentaseal PS15 |
| PSA41D |
|
| PSA42D |
|
| PSL600CJ-13 |
Backup Ring PSL600CJ-13 |
| PSL600CJ-14 |
Pentaseal PSL600CJ-14 |
| RING-T2P15 |
Backup Ring T2P15 |
| RING-T2P22 |
Backup Ring T2P22 |
| RP-RR |
RP System series |
| RP4 |
Rivet Presenter for 1/8" Diameter Rivets |
| RP4-1 |
Motor Shaft Bearing |
| RP4-111 |
Screw - Frame |
| RP4-114 |
Screw - Motor Mounting Plate |
| RP4-115 |
Screw - Micro Switch |
| RP4-118 |
Screw - Orientation Plate |
| RP4-121 |
Screw - Feed Drum |
| RP4-129 |
Screw - Trough Cover |
| RP4-13 |
Micro Switch |
| RP4-132 |
Screw - Reservoir |
| RP4-133 |
Shaft Drive Coupler Pin |
| RP4-14 |
Feed Drum Frame |
| RP4-143 |
Index Head |
| RP4-145 |
Bracket - Escapement Cylinder |
| RP4-146 |
Screw - Frame Cover - Lower |
| RP4-147 |
Screw - Motor Cover |
| RP4-150 |
Screw - Track Jack |
| RP4-151 |
Washer - Orientation Plate |
| RP4-152 |
Washer - Reservoir |
| RP4-154 |
Pin - Cover Locator |
| RP4-158 |
Nosepiece - Cylinder Rod (use RP4-238) |
| RP4-159 |
Screw - Transformer |
| RP4-16 |
Rivet Reservoir |
| RP4-160 |
Cylinder Holder |
| RP4-161 |
Screw - Solenoid Valve |
| RP4-162 |
Air Tubing |
| RP4-163 |
10-32 Airline Fitting |
| RP4-164 |
10-32 "L" - Fitting |
| RP4-166 |
Solenoid Valve |
| RP4-17 |
Cover-Gear Motor |
| RP4-170 |
Escapement Cylinder |
| RP4-173 |
Circuit Breaker Plate |
| RP4-174 |
Thumb Screw |
| RP4-175 |
Air Line Tee Fitting |
| RP4-176 |
Spring-Locking Pin |
| RP4-177 |
Retaining Ring - Locking Pin |
| RP4-178 |
Adaptor - 510/5201 Receptacle |
| RP4-179 |
Pin - Locking |
| RP4-180 |
Housing - Receptacle |
| RP4-181 |
Bench Stop Bracket |
| RP4-182 |
Prestolok Fitting |
| RP4-183 |
Bulkhead Adaptor |
| RP4-184 |
1/4 - 18 NPT - Street Tee |
| RP4-185 |
Transformer (RP4-E only) |
| RP4-186 |
Boot |
| RP4-187 |
Breaker Switch |
| RP4-188 |
Breaker Switch (RP4-E only) |
| RP4-191 |
Hinge Bar |
| RP4-192 |
Cover |
| RP4-193 |
Specification Label (RP4-E only) |
| RP4-194 |
Specification Label |
| RP4-195 |
Caution Label |
| RP4-196 |
Fill Level Label |
| RP4-197 |
Cord Label (RP4-E only) |
| RP4-209 |
Dowel Pin - Slide Insert |
| RP4-212 |
Screw - Timer Mount |
| RP4-213 |
Nut - Timer Mount |
| RP4-214 |
Lock Washer |
| RP4-215 |
Timer - Solid State, 8 Sec. |
| RP4-219 |
Orientation Plate Sub Assembly |
| RP4-22 |
Cover-Main Frame |
| RP4-221 |
1/4-18NPT - HEX Nipple |
| RP4-224 |
Adaptor 5200/540 |
| RP4-225 |
Housing, Receptacle |
| RP4-228 |
Adaptor ProSet2100/5400 |
| RP4-229 |
Housing, Receptacle |
| RP4-23 |
Foot Pad |
| RP4-231 |
Cable Tie |
| RP4-233 |
Screw - Circuit Breaker Mounting |
| RP4-234 |
Screw - Orientation Plate |
| RP4-235 |
Liner - Orientation Plate |
| RP4-236 |
Air Cylinder |
| RP4-238 |
Air Cylinder Nosepiece |
| RP4-24 |
Main Frame |
| RP4-247 |
Spring Cap |
| RP4-248 |
Retaining Ring-Spring Cap |
| RP4-260 |
90 Degree Elbow Fitting |
| RP4-261 |
Screw |
| RP4-290 |
Adaptor Housing Assembly for 1/8" & 5/32" Rivets.Use with: |
| RP4-350 |
ProSet 2500 Receptacle Assy for RP4 & RP5 |
| RP4-36 |
Bottom Chamber Insert |
| RP4-4 |
Snap Bushing |
| RP4-400 |
Power Supply Cord |
| RP4-405 |
Power Supply Cord (RP4-E only) |
| RP4-410 |
Wire Sub Assy. No. 4 (RP4-E only) |
| RP4-415 |
Wire Sub Assy. No. 5 (RP4-E only) |
| RP4-420 |
Drum Frame Harness - Power Wire |
| RP4-425 |
Drum Frame Harness (RP4-E only) |
| RP4-43 |
Rivet Track Assembly |
| RP4-430 |
Main Frame Harness - Switch Wire |
| RP4-435 |
Solenoid Valve Sub-Assembly |
| RP4-44 |
Trough Cover |
| RP4-440 |
Gear-Motor Sub-Assembly |
| RP4-445 |
Wire Sub-Assy. No. 17 Timer |
| RP4-45 |
Feed Drum Shaft |
| RP4-450 |
Solenoid Valve Assembly - Export |
| RP4-455 |
Wire Sub-Assembly (RP4-E only) |
| RP4-460 |
Feed Drum Frame Sub-Assembly |
| RP4-465 |
Rivet Feed Cylinder Sub-Assembly |
| RP4-470 |
Escapement Cylinder Sub-Assembly |
| RP4-486 |
Adaptor Housing Assembly for 1/8" & 5/32" Rivets.Use with: |
| RP4-5 |
Terminal Block |
| RP4-50 |
Feed Drum Shaft Coupler |
| RP4-501 |
Adaptor Housing Assembly for 1/8" & 5/32" Rivets.Use with: |
| RP4-51 |
Retaining Ring |
| RP4-52 |
Mounting Plate-Gear Motor |
| RP4-55 |
Receptacle Housing Cover |
| RP4-56 |
Guide Jaw (Replace as a pair) |
| RP4-58 |
Housing Pin |
| RP4-6 |
Strain Relief Bushing |
| RP4-60 |
Trigger Spring |
| RP4-62 |
Jaw Spring (Replace as a pair) |
| RP4-64 |
Slide Insert |
| RP4-65 |
Housing Cap Screw |
| RP4-68 |
Trigger |
| RP4-69 |
Washer - #8 |
| RP4-72 |
Feed Drum Assembly |
| RP4-79 |
Guard Spring |
| RP4-9 |
Motor Fan |
| RP4-96 |
Spring Locator Pin |
| RP5 |
Rivet Presenter for 5/32" Diameter Rivets |
| RP5-103 |
Bottom Chamber Insert |
| RP5-105 |
Nosepiece-Cylinder Rod |
| RP5-106 |
Receptacle Housing Cover |
| RP5-107 |
Index Head |
| RP5-108 |
Housing Locking Receptacle |
| RP5-110 |
Plate Bracket |
| RP5-111 |
Mainframe |
| RP5-112 |
Cover, Mainframe |
| RP5-114 |
Rivet Track Spacer |
| RP5-115 |
Rivet Trace Assembly |
| RP5-130 |
Solenoid Valve Sub-Assembly |
| RP5-43 |
Rivet Track Assembly |
| RP5-440 |
Gear-Motor Sub-Assembly |
| RP5-465 |
Rivet Feed Cylinder Assembly |
| RP5-470 |
Escapement Cylinder Assembly |
| RP6 |
Rivet Presenter for 3/16" Diameter Rivets |
| RP6-1 |
Cover, Mainframe |
| RP6-10 |
Orientation Plate Assembly |
| RP6-11 |
Guide Jaw (replace as pair) |
| RP6-110 |
Adaptor Housing Assembly for 1/8" Large Flange & 3/16" Rivets.Use with: |
| RP6-12 |
Housing Cover |
| RP6-13 |
Housing |
| RP6-2 |
Mainframe |
| RP6-350 |
ProSet 2500 Receptacle Assy for RP6 |
| RP6-4 |
Feed Drum Assembly |
| RP6-470 |
Escapement Cylinder Assembly |
| RP6-486 |
Adaptor Housing Assembly for 1/8" Large Flange & 3/16" Rivets.Use with: |
| RP6-5 |
Slide Insert |
| RP6-501 |
Adaptor Housing Assembly for 1/8" Large Flange & 3/16" Rivets.Use with: |
| RP6-7 |
Index Head |
| RP6-8 |
Bottom Chamber Insert |
| RP6-9 |
Jaw Spring (Replace as a pair) |
| SPIN-3*14AW |
Spring Pin SPIN-3*14AW |
| SPIN-3*8AW |
Spring Pin SPIN-3*8AW |
| SS-M4*5 |
Set Screw SS-M4*5 |
| SS-M6*5 |
Set Screw SS-M6*5 |
| TLW-A8 |
Toothed Lock Washer TLW-A |
